• Archives

  • Categories

  • Pages

  • Follow me on Twitter

Is there any maintenance I should do when I pull out my fountain for the year? | Ponds & Lakes Q&A

Q: Is there any maintenance I should do when I pull out my fountain for the year?

Q: Is there any maintenance I should do when I pull out my fountain for the year?

John – Epping, NH

A: Decorative fountains add beauty to your waterscape while pumping some extra oxygen to your pond, but they are designed to be used in the warmer months – not winter. So when you’re ready to pull out your fountain for the year, follow these steps to ensure it’ll be ready for use spring:

  1. Pull Unit from the Pond: To remove your fountain from the water, simply release it from its mooring line and gently reel it in. Leave the mooring line stakes in place to make it easy to reinstall it in the spring. You’ll save time from having to place the fountain in position.
  2. Clean Your Fountain and Lights: As your fountain runs through the spring, summer and fall, algae and other debris accumulate on the motor, lights and float. This unsightly debris acts as an insulator that traps heat around the motor, which could cause overheating when you reinstall it in the spring. Get out your scrubber and polish your surfaces while they’re still wet. Some expert advice: It’s best to clean that gunk off before it dries on.
  3. Inspect for Damages: Normal wear-and-tear and curious critters can cause nicks and chew marks in the cord that will need to be repaired, so check it for damages. Also, if you haven’t performed routine maintenance on your unit, like changing oil and seals, winter is the perfect time to do so while your fountain is out of the water and in your workshop.
  4. Cover the Cord Ends: Once your fountain is cleaned and repaired, cover your power cord ends by covering them with a vented plastic bag to keep dust and debris out while it’s in storage. If you have an AquaStream™ Fountain you can use caps to cover the power cord ends.
  5. Store in Safe Spot: Find a safe, frost-free place to store your fountain over the winter. Ideally, stash it in your garage, basement or other place that won’t freeze.
  6. Keep Aeration Running: Unless you plan to use your pond for recreation, like hockey or ice skating, your pond will need oxygen through the winter. Continue to use your diffused aeration system to maintain a hole in the ice for ventilation and gas exchange.

Follow these simple maintenance steps and you’ll be ready to reinstall your fountain in the spring – once the ice melts, that is!

Pond Talk: Where do you store your fountain in the winter?

Protect Your Fish With Winter Aeration - Airmax(r) PondSeries™ Aeration Systems

 

Enjoy this article?
Join over 60,000 fellow pond owners and receive our Weekly Pond Talk every Saturday.

 

Is there any maintenance I should do when I pull out my fountain for the year? | Ponds & Lakes Q&A

Q: Is there any maintenance I should do when I pull out my fountain for the year?

Q: Is there any maintenance I should do when I pull out my fountain for the year?

John – Epping, NH

A: Decorative fountains add beauty to your waterscape while pumping some extra oxygen to your pond or lake, but they are designed to be used in the warmer months – not winter. So when you’re ready to pull out your fountain for the year, follow these six steps to ensure it’ll be ready for use again in the spring:

  1. Pull Unit from the Pond: To remove your fountain from the water, simply release it from its mooring line and gently reel it in. Leave the mooring line stakes in place to make it easy to reinstall it in the spring. You’ll save time from having to place the fountain in position.
  2. Clean Your Fountain and Lights: As your fountain runs through the spring, summer and fall, algae and other debris accumulate on the motor, lights and float. This unsightly debris acts as an insulator that traps heat around the motor, which could cause overheating when you reinstall it in the spring. Get out your scrubber and polish your surfaces while they’re still wet. Some expert advice: It’s best to clean that gunk off before it dries on.
  3. Inspect for Damages: Normal wear-and-tear and curious critters can cause nicks and chew marks in the cord that will need to be repaired, so check it for damages. Also, if you haven’t performed routine maintenance on your unit, like changing oil and seals, winter is the perfect time to do so while your fountain is out of the water and in your workshop.
  4. Cover the Cord Ends: Once your fountain is cleaned and repaired, cover your power cord ends by covering them with a vented plastic bag to keep dust and debris out while it’s in storage. If you have an AquaStream™ Fountain you can use caps to cover the power cord ends.
  5. Store in Safe Spot: Find a safe, frost-free place to store your fountain over the winter. Ideally, stash it in your garage, basement or other place that won’t freeze.
  6. Keep Aeration Running: Unless you plan to use your pond for recreation, like hockey or ice skating, your pond will need oxygen through the winter. Continue to use your diffused aeration system to maintain a hole in the ice for ventilation and gas exchange.

Follow these simple maintenance steps and you’ll be ready to reinstall your fountain in the spring – once the ice melts, that is!

Pond Talk: Where do you store your fountain in the winter?

Protect Your Fish With Winter Aeration - Airmax(r) PondSeries™ Aeration Systems

 

Enjoy this article?
Join over 50,000 fellow pond owners and receive our Weekly Pond Talk every Saturday.

 

Is there any maintenance I should do when I pull out my fountain for the year? | Ponds & Lakes Q&A

Q: Is there any maintenance I should do when I pull out my fountain for the year?

Q: Is there any maintenance I should do when I pull out my fountain for the year?

John – Epping, NH

A: Decorative fountains add beauty to your waterscape while pumping some extra oxygen to your pond or lake, but they are designed to be used in the warmer months – not winter. So when you’re ready to pull out your fountain for the year, follow these six steps to ensure it’ll be ready for use again in the spring:

  1. Pull Unit from the Pond: To remove your fountain from the water, simply release it from its mooring line and gently reel it in. Leave the mooring line stakes in place to make it easy to reinstall it in the spring. You’ll save time from having to place the fountain in position.
  2. Clean Your Fountain and Lights: As your fountain runs through the spring, summer and fall, algae and other debris accumulate on the motor, lights and float. This unsightly debris acts as an insulator that traps heat around the motor, which could cause overheating when you reinstall it in the spring. Get out your scrubber and polish your surfaces while they’re still wet. Some expert advice: It’s best to clean that gunk off before it dries on.
  3. Inspect for Damages: Normal wear-and-tear and curious critters can cause nicks and chew marks in the cord that will need to be repaired, so check it for damages. Also, if you haven’t performed routine maintenance on your unit, like changing oil and seals, winter is the perfect time to do so while your fountain is out of the water and in your workshop.
  4. Cover the Cord Ends: Once your fountain is cleaned and repaired, cover your power cord ends by covering them with a vented plastic bag to keep dust and debris out while it’s in storage.
  5. Store in Safe Spot: Find a safe, frost-free place to store your fountain over the winter. Ideally, stash it in your garage, basement or other place that won’t freeze.
  6. Keep Aeration Running: Unless you plan to use your pond for recreation, like hockey or ice skating, your pond will need oxygen through the winter. Continue to use your diffused aeration system to maintain a hole in the ice for ventilation and gas exchange.

Follow these simple maintenance steps and you’ll be ready to reinstall your fountain in the spring – once the ice melts, that is!

Pond Talk: Where do you store your fountain in the winter?

Protect Your Fish With Winter Aeration - Airmax® Shallow Water Series™ Aeration Systems

What is supercooling? | Ponds & Lakes Q&A

Q: What is supercooling??

Q: What is supercooling?

Aloma, Warroad, MN

A: Supercooling is uncommon, but it can occur in lakes and ponds, particularly in the northern states. Here’s what you need to know about it and how to prevent it from happening.

In the winter time water stratifies in pond and lakes without proper aeration when surface temperatures are extremely cold, creating what’s called a thermocline. A thermocline happens as warmer water about 39°F or so – sinks to the bottom, while colder water about 32°F or so – rises to the top. Very little mixing of the layers occurs, particularly in calm weather.

Supercooling could become an issue if you’re running a surface aeration system in shallow ponds with fish. The fish prefer to stay on the bottom of the pond in the warmer pockets of water during the winter. They’re in winter-hibernation mode, and all they want to do is be in a stress-free spot until spring.

As the aerator circulates the warmer water with the cooler water at the surface, the overall temperature could drop. In extreme cases when the temperatures are well below 0°F, the water temperature can actually drop below its freezing point without becoming a solid – a rare process known as supercooling.

If the water gets too cold, your fish have nowhere warm to go. Living without their warm hangout spot could compromise their oxygen supply and immune systems, making them vulnerable to parasites and diseases.

The best way to deliver oxygen to your fish is with a bottom diffused aerator, like an Airmax® Aeration System. You can keep it running without creating an inhospitable environment for your finned friends by simply moving your diffuser plates closer to the surface or turning half of them off.

If you relocate the diffuser plates to a spot that’s about half the depth of your pond or run only 50 percent of them, a pocket of warm water will remain for your fish at the bottom. You’ll continue pumping oxygen into the water and keeping a hole in the ice for gas exchange without having to worry about freezing your fish.

Pond Talk: What steps do you take to prevent over cooling or supercooling your pond?

Call (866) POND-HELP - Free Aerial Aeration Mapping Service