• Archives

  • Categories

  • Pages

  • Follow me on Twitter

Is there any maintenance I should do when I pull out my fountain for the year? | Ponds & Lakes Q&A

Q: Is there any maintenance I should do when I pull out my fountain for the year?

Q: Is there any maintenance I should do when I pull out my fountain for the year?

John – Epping, NH

A: Decorative fountains add beauty to your waterscape while pumping some extra oxygen to your pond or lake, but they are designed to be used in the warmer months – not winter. So when you’re ready to pull out your fountain for the year, follow these six steps to ensure it’ll be ready for use again in the spring:

  1. Pull Unit from the Pond: To remove your fountain from the water, simply release it from its mooring line and gently reel it in. Leave the mooring line stakes in place to make it easy to reinstall it in the spring. You’ll save time from having to place the fountain in position.
  2. Clean Your Fountain and Lights: As your fountain runs through the spring, summer and fall, algae and other debris accumulate on the motor, lights and float. This unsightly debris acts as an insulator that traps heat around the motor, which could cause overheating when you reinstall it in the spring. Get out your scrubber and polish your surfaces while they’re still wet. Some expert advice: It’s best to clean that gunk off before it dries on.
  3. Inspect for Damages: Normal wear-and-tear and curious critters can cause nicks and chew marks in the cord that will need to be repaired, so check it for damages. Also, if you haven’t performed routine maintenance on your unit, like changing oil and seals, winter is the perfect time to do so while your fountain is out of the water and in your workshop.
  4. Cover the Cord Ends: Once your fountain is cleaned and repaired, cover your power cord ends by covering them with a vented plastic bag to keep dust and debris out while it’s in storage. If you have an AquaStream™ Fountain you can use caps to cover the power cord ends.
  5. Store in Safe Spot: Find a safe, frost-free place to store your fountain over the winter. Ideally, stash it in your garage, basement or other place that won’t freeze.
  6. Keep Aeration Running: Unless you plan to use your pond for recreation, like hockey or ice skating, your pond will need oxygen through the winter. Continue to use your diffused aeration system to maintain a hole in the ice for ventilation and gas exchange.

Follow these simple maintenance steps and you’ll be ready to reinstall your fountain in the spring – once the ice melts, that is!

Pond Talk: Where do you store your fountain in the winter?

Protect Your Fish With Winter Aeration - Airmax(r) PondSeries™ Aeration Systems

 

Enjoy this article?
Join over 50,000 fellow pond owners and receive our Weekly Pond Talk every Saturday.

 

I have an old sump pump. Can I use it to create a fountain for my pond? | Ponds & Lakes Q&A

Q: I have an old sump pump. Can I use it to create a fountain for my pond?

Q: I have an old sump pump. Can I use it to create a fountain for my pond?

Nick – Linwood, KS

A: Sounds like you want to do some “upcycling” and save a little money while making use of old equipment that’s sitting around. What a fun project, and something you can show off to your friends!

Yes, you can certainly transform that old sump pump into a fountain for your pond – but whether it works will depend on what you want to do with that fountain.

Sump Pump Fountain?

A sump pump is traditionally used to remove water that’s collected in a basement. It pumps the water away from the house to a place where it’s no longer problematic. It’s not really designed for long-term continuous use, and so using a sump pump to create a spraying fountain might decrease its life expectancy. Replacing it could be costly.

There are other factors to consider, too. A sump pump might cost more to operate. You’ll still need to create a way to anchor or suspend the motor and create a spray. And you’ll need to extend the power cord long enough to reach a power source safely – which will require trial and error or fancy engineering.

If you’re a build-it-yourselfer in search of a challenge and plan to not use it for long-term continuous use, go for it! If not, consider purchasing an actual fountain.

Out-of-the-Box Easy

For those who are looking for an easy, cost-effective and trouble-free way to add some splash to a pond, buying a pre-manufactured decorative fountain has its benefits, including:

  • They come with pumps that are designed to be used as a fountain, so they create much more water movement and a heavier spray that’s less affected by wind and pump-clogging floating debris.
  • They can be used as an aeration system in ponds less than 6 feet deep.
  • All the engineering work is done for you! After a quick installation, you’ll have a decorative spray and a power cord that’s long enough to reach the shore.
  • Some, like the AquaStream™ Fountain and Light Combo Kits, come with decorative options, like lights and different spray patterns.

Whichever you choose, it’s always a great idea to create movement and aerate the water. Your fish and plants will appreciate it, and you – and your guests – will, too!

Pond Talk: Have you ever made a decorative fountain with upcycled pieces and parts?

Enjoy the Sound of a Fountain - The Pond Guy® AquaStream™ 1/2 HP Fountain

Isn’t my fountain enough aeration for my pond? | Ponds & Lakes Q&A

Q: Isn’t my fountain enough aeration for my pond?

Q: Isn’t my fountain enough aeration for my pond?

Kelly – Harrisville, WV

A: Fountains deserve a lot of love. As they launch water into the air, they add dramatic movement and visual appeal to the landscape. The sound of stirring water makes anyone within earshot relaxed and tranquil. Fountains add a good deal of oxygen to the pond as the tiny droplets make contact with the air and fall back into the pond. But do they provide enough aeration? It all depends on your pond’s depth.

More Than 6 Feet Deep…

If your pond is more than 6 feet deep, your fountain does not provide enough aeration. Why? The best way to aerate the pond is to circulate the entire body of water at the same time. Because a fountain draws water from the top of the water column only, the water deeper than the 6-foot mark remains untouched – and oxygen deprived.

An aeration system, like the Pond Series™ Aeration System, will pump air to the diffuser plate positioned at the bottom of the pond. The rising bubbles then lift and aerate the water from the bottom up, ensuring that the entire pond is circulated and oxygenated.

Less Than 6 Feet Deep…

If your pond is less than 6 feet deep, your fountain is good to go. Because enough oxygen is exchanged at the pond’s surface, you don’t need additional aeration – but you do need to worry about the fountain’s spray pattern and horsepower.

The most effective shape for aeration is the “V” shape or “Classic” pattern, like the one included in the AquaStream™ fountain. It does the job simply and effectively. The more decorative the spray pattern, the less likely it is to adequately aerate your pond because more energy is spent on creating the patterns than on moving the water.

As for horsepower, when using a fountain for aeration purposes, go with a 1.5 HP motor per acre. Remember that depending on your pond’s size and shape, you may need more than one fountain to properly aerate. If you’re using a fountain for decoration only, you can go with a 1 HP per acre motor instead.

Weighing the Cost

A fountain can be costly to operate, but an aeration system – which has lower operating costs when compared to a fountain running 24/7 – is an affordable alternative. Whichever method you choose, don’t go without aeration, because that could cost you more in the long run!

Pond Talk: What’s your favorite fountain? What makes it stand out to you?

For Optimal Aeration - Airmax® Pond Series™ Aeration Systems