• Archives

  • Categories

  • Pages

  • Follow me on Twitter

I spend a lot of time trying to kill algae, and sometimes it doesn’t work. Do you have any tips? | Ponds & Lakes Q&A

Q: I spend a lot of time trying to kill algae, and sometimes it doesn’t work. Do you have any tips?

Q: I spend a lot of time trying to kill algae, and sometimes it doesn’t work. Do you have any tips?

Vince – Columbia City, IN

A: Frustrating, isn’t it? You spend hours upon hours pondside, dosing the water with algaecides and raking out algae-feeding plant matter and detritus, only to see the green menace return weeks – if not days – later. Is there a way to control the nuisance algae that’s turning your pond into pea soup?

You bet. Below are our top recommendations for battling the algae. If you follow these guidelines, you’ll have that green menace under control in no time.

#1 – Treat Only Actively Growing Algae
When using algae control products in your pond or lake, the algae must be present and actively growing. Why? Because the chemicals need to make direct contact with the tiny organisms and absorb into their cells for them to be effective; if there’s no living algae, the chemicals will land in the water and become diluted, and therefore ineffective when the green stuff blooms.

#2 – Treat When Weather Is Favorable
Algae can grow in cold temperatures – even frigid, depending on the species – but algaecides aren’t so tolerant. The pond water must be warmer than 60°F for the chemicals in them to work. Apply your algae treatment on a sunny, mild day when rain is not expected in the immediate forecast. This will allow the chemicals to adequately absorb into the algae. As always, read the product label for instructions and specific temperature requirements.

#3 – Treat Only a Third at a Time
When temperatures heat up and the algae dies off, that combination of warm water and decaying plant matter reduces the amount of oxygen available to fish and other living critters in the pond. Keep them in an oxygen-rich environment by treating the pond in small sections and wait 7-10 days before moving to the next section. In addition, keep your aeration system or fountains running during treatment to continue circulating and oxygenating the water.

#4 – Read the Product Label
Different algaecides have different active ingredients, inert ingredients and specifications, so always read your product’s label for appropriate protective equipment and application rates. Pay special attention to warnings concerning water use and restrictions in ponds used for irrigation, drinking and swimming, as well as in ponds that house certain types of fish. If you have trout, which are sensitive to copper-based treatments, test the carbonate hardness levels and ensure they are above 50 ppm prior to treatment. If they’re above that, use another treatment, like Hydrothol®, that contains no copper.

#5 – Follow Up with Airmax® Ecosystem Pond Management Program
Algaecides are a great tool that can temporarily clear up pea soup water, but they do little address the actual problem causing the algae – which is excessive nutrients and organics. By following your treatment up with proactive pond management practices, such as aeration and natural water treatments like MuckAway™, you will reduce the accumulation of dead organic material, which will help to keep your water clear season after season. Check out the Airmax® Ecosystem™ – Proactive Pond & Lake Management video below for more information or view the article here.

Pond Talk: Do you have any additional tips for successful algae management?

Eliminate Algae and Chara Fast - Pond Logic Algae Defense

Is it too cold to treat my algae blooms? | Ponds & Lakes Q&A

Is it too cold to treat my algae blooms?

Q: Is it too cold to treat my algae blooms?

Ashley – Cross Junction, VA

A: The bane of pond keepers, algae—be it planktonic pea soup, filamentous pond scum or bottom-dwelling chara—can be treated any time of year, as long as the water temperature in your pond or lake is above 60 degrees Fahrenheit.

But what’s so special about the magical 60-degree temp?

Though algae will grow at temperatures lower than that, the chemicals in both Pond Logic® Algae Defense & Treatment Booster™ PLUS Combo and Applied Biochemists Cutrine®-Plus Granular Algaecide that are used to control suspended, floating and bottom-of-the-pond algae require warmer water temperatures to work properly.

If you’re unsure of your lake’s water temperature, use a pond thermometer, like the Pond Logic® Floating Pond Thermometer, to get a fast and accurate reading.

Here are three more tips for treating fall algae blooms:

1. Heavier doses may be required: When treating well-established algae or algae that has grown later in the season, you may need to up your dosage rates to get the same effect as when treating fresh algae or algae that has sprung up in the spring. Read the product’s label for safe usage guidelines.

2. Use the right product: Pond Logic® Algae Defense & Treatment Booster™ PLUS Combo will take a serious toll on planktonic, filamentous and chara growth, but Applied Biochemists Cutrine®-Plus Granular Algaecide works especially well on chara. Well-established chara will build up a chalky deposit, which gives it super powers against chemical treatments. But the Cutrine®-Plus granules sink to the bottom of the pond and dissipate right where that nuisance algae resides.

3. Watch the weather: The best time to apply Algae Defense® and Cutrine®-Plus Granular is in the morning on a calm, sunny day. For the Algae Defense®, simply mix with water and spray with a pressurized sprayer; for the Cutrine®-Plus Granular, broadcast the granules in the area that needs to be treated.

Once the water temperature dips below 60 degrees Fahrenheit, you’re out of luck when it comes to treating algae blooms. But you can revel in the fact that they will slow down when the water reaches 50 degrees or so—only to emerge again come spring!

Pond Talk: What do you do to treat fall algae blooms in your pond or lake?

Pond Logic® Algae Defense® - Quickly Eliminate Pond Algae

When Should I Start Treating Floating Algae In My Pond? | Ponds & Lakes Q&A

When Should I Start Treating Floating Algae In My Pond?

When Should I Start Treating Floating Algae In My Pond?

Jacquelyn – Pottsville, PA

 

Spring is just around the corner and in some areas, algae is already growing. But the question we hear quite often around this time is, “When can I start?” or, “Is it too early to treat?” The answer really depends on what the weather is like at your pond.

Getting a jump start on algae early in the season can help control growth as the season progresses. Fortunately, treating floating algae and preventing its build up is rather easy and really only one factor may stop you…temperature.

Is your pond above or below 50 degrees? This is important because aquatic algicides become less effective when temperatures fall below 60° Fahrenheit. However, understand that treatments will still work, just not as well. If you have an abundance of algae growing when the water temperatures are below 60° Fahrenheit, it’s worth a quick treatment to get it under control early. If the water temperature is too low, wait to use any treatment and instead use a lake rake to remove excessive algae if you are not able to chemically treat it. Another up-and-coming product that works very well to skim floating debris is the PondSkim™ Debris Skimmer. The PondSkim™ is a tool that contains a float and debris catcher. Simply drag across the surface of the water to collect debris.

If you have algae already growing in your pond we suggest that you get a jump start on it and you’ll be happy you did.

The Pond Guy Pond & Beach Rake

How can I find out the size of my pond? | Pond & Lake Q&A

There are some weeds in the pond but do I need to add anything else for my fish?

How can I find out the size of my pond?
Paul – Scottsdale, AZ

While most of us could take a quick guess at the size of our pond many times we don’t really know the true dimensions. Most products for pond treatment such as aquatic herbicides, aquatic algaecides, and pond dye are dosed based on surface acres or square footage. Being off by 30 ft. in pond measurement could mean reducing or increasing your pond size enough to make a treatment ineffective. So how should you go about getting the correct measurements of your pond?

It is important to understand that measuring your pond involves using a universal unit of measure like feet and inches. While you may know what you mean when you say the water comes up to your chin that will be interpreted differently from person to person. For measuring depth, tie a weight to some string and let it sink to the bottom of the pond, pull the string in just enough so there is no slack left. Mark the string at the surface of the water. Once you bring up your weight lay the line out on the ground and measure it with a tape measure for a more accurate reading. Take measurements in multiple areas as most ponds are not the same depth throughout. When measuring overall lengths and widths you can use a flexible tape to gather dimensions or measure your stride and pace off the dimensions. Typically one pace is around 3ft. If your pond is irregular in shape you can also use online applications like Google Earth and Bing to locate your pond and measure it from the comfort of your computer chair.

To calculate your pond size you must first figure the square footage of the pond. Multiply the length of your pond by the width to find your square footage. Let’s use a 200’ long by 100’ wide pond as an example. 200’x 100’ equals 20,000 square feet. 1 surface acre consists of 43,560 square feet. To find out how our 20,000 square foot pond measures up to 1 acre we can simply divide 20,000 by 43,560. You should end up with .45 surface acres or slightly under ½ surface acre. If your pond better represents a triangle or circle you can use the equations given below to help calculate the total surface area.

Pond Size Dimensions

If you are unsure of the best method for measuring your pond or want a second opinion you can always contact one of our pond guys and gals toll free at 866.766.3435 or use our web calculator.

Pond Talk: Was your pond dimension “guess” accurate with your actual pond measurements?

Airmax® Aeration

Follow

Get every new post delivered to your Inbox.

Join 227 other followers