• Archives

  • Categories

  • Pages

  • Follow me on Twitter

Foamy Water – How to control foam in your pond | Learning Center


Is foamy water making your pond look more like the inside of a washing machine than an aquatic oasis? An excess of organic material in the water is likely causing all that bubbly white or gray buildup.

Accumulation happens when too many fish are living in the pond, you’re overfeeding them, filtration is inadequate or there’s runoff seeping into your water garden. Then, as the water flows down your waterfall, air and water collide, causing the proteins and other organics to be trapped inside bubbles rather than turning into ammonia and nitrites. Air-water collision is why the foam forms, particularly the base of your waterfall.

What’s the solution?

Short-term: You can change out part of the pond’s water to remove the foam. When you do, be sure to add some Pond Logic® Stress Reducer PLUS to the fresh water, which will form a beneficial slime coat on your fish and make tap water safe for them. In addition, add Pond Logic® Defoam™ to your water. Safe for fish, plants and wildlife, you simply shake the can and pour its contents into the pond. The foam will disappear in no time.

Long-term: You have several options:

  • Increase Filtration: Boost your filtration by adding plants to your pond or increasing the capacity of your existing filtration system.
  • Relocate Fish: Too many fish will produce excess waste, which means more foam. The rule is to allow 1 inch of adult fish per square foot of surface area, so if you have too many koi or goldfish in your pond, you might want to think about finding new homes for some of them.
  • Cut Back on Meals: If you’re feeding your fish too much or too often, the excess food adds to the extra organic material in your pond’s water. Only feed your fish an amount they’ll eat in a few minutes.
  • Add Nutrient-Eating Bacteria: To help break down the nutrient load in the water, add beneficial bacteria in such as, Pond Logic® LiquidClear™ to work. They digest the dead organics in the pond, making the water crystal clear and foam free.
  • Aerate the Water: Aeration will also help reduce the nutrient load by circulating the water column and feeding fresh oxygen to the busy bacteria.

Foamy water can be a nuisance, but once you achieve some balance in your pond’s ecosystem, those bubbles will disappear in no time.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: