## I added too much pond dye. What do I do? | Ponds & Lakes Q&A

Q: I added too much pond dye. What do I do?

Roy – Bend, OR

A: Pond dye is a good thing for many reasons, like algae control, aesthetics and camouflage from predators. Plus, it’s totally safe for animals, fish and humans who like to go for a dip in the water. But too much pond dye can create a monochromatic mess that looks totally unnatural in a landscape.

So what can you do? Not much, unfortunately. The only practical solution is to wait it out while long periods of sunshine fade the color or heavy rains dilute the dye. It will eventually lose its black or blue hue, but it will take a bit.

To prevent this from happening again, calculate your pond’s surface area and depth before you add color to your pond or lake so that you use the right amount of dye. Two Pond Dye Packets or one liquid quart of Pond Dye Concentrate treats up to one surface acre with an average depth of four to six feet deep.

Here’s how to figure out those important numbers:

Surface Area: First, figure out your pond’s square footage. If it’s rectangular or square, determine its size by simply measuring its length and width and multiplying them (250 feet x 250 feet = 62,500 square feet). If your pond is irregularly shaped, break it up into several segments, measure or pace off each one’s length and width, calculate the square footage and add them together. [(100 feet x 300 feet) + (40 feet x 50 feet) = 30,000 + 2,000 = 32,000 square feet.]

To determine your pond’s surface area, divide its total square footage by 43,560. So in the above example, 62,500 square feet / 43,560 = ~1½ acres; and 32,000 square feet / 43,560 = ~3/4 acre.

Pond Depth: To measure its depth, gather some tools, including a tape measure, some chain or string, a weight, something to write with, and a boat or canoe. Mark a chain or knot a string in 1-foot intervals using your tape measure and attach the weight to one end. Climb aboard your boat, travel to various areas in your pond and drop the weight in the water, noting where you feel it hit bottom. Take an average of those measurements to get your depth.

Once you have your numbers, use the appropriate amount of dye. Unsure of your pond’s size? No worries! Add 1 packet and wait 24 hours. If it looks like you need more, add another packet. Simple as that!

Pond Talk: Have you ever had a pond dye problem in your pond or lake? If so, what happened – and how did you correct it?

### 4 Responses

1. How long is a bit? I added blue to my pond and it looks great in the big pond but really bad coming from the upper pond down a water fall. HATE IT!! This is a swimming pond, would chlorine hasten the fading??

• Hi Laurie – In a large pond you should see the dye begin to fade within 4-6 weeks depending on rain and evaporation. Dilution is the best way to reduce the color. I would not add chlorine. Though it may lessen the color it is also not safe for aquatic life.

• No fish in this pond but I will be adding floating plants, is there a way to neutralize chlorine in ponds like there is for fish tanks?

• Hi Laurie – They are available for small water gardens but I am not aware of any for a large pond.