• Archives

  • Categories

  • Pages

Four Handy Pond Tools to Keep Around | Ponds & Lakes Q&A

Four Handy Pond Tools to Keep Around

Four Handy Pond Tools to Keep Around

Who doesn’t love tools? They’re cool to look at, fun to play with – and, the best part, they help make chores easy. When it comes to maintaining your pond or lake, tools of all shapes and sizes will come in very handy, particularly these four must-haves, below.

Pond Rake

A pond rake pulls, gathers and removes dead debris from the surface or the bottom of a pond.

Debris on the surface of a pond, like algae or fallen leaves, can sink to the bottom and start to decay, adding to the muck and detritus that’s already there. All that debris degrades water quality, compromises fish health, provides a nutrient source for nuisance plants, and can even affect chemical treatments’ ability to work.

A floating/sub-surface pond rake, like the Pond Logic® Pond and Beach Rake, or a sub-surface pond rake, like the Jenlis Weed Raker™, lends a long helping hand. Elongated by rope so you can easily get the deep-water growth, both rakes work by removing submerged lake and pond weeds by their roots, slowing their spread.

Weed Cutter

A weed cutter, like the Pond Logic® Weed Cutter and the Jenlis WeedRazer®, mechanically slices through weeds at their stems so they can then be raked out.

The 28-inch, double-sided Pond Logic® Weed Cutter features a two-piece, rust-proof, powder-coated aluminum handle that’s 11 feet long. It’s great for removing floating aquatic vegetation, marginal weeds and cattails that extend past the pond’s edge.

The V-shaped Jenlis WeedRazer® clears a 4-foot-wide path in pond weeds by sinking to the bottom and slicing through submerged weeds like watermilfoil, cattails and lily pads as you pull it across the pond. The razor-sharp tool weighs just 8 pounds, making it light enough to toss 30 feet or more yet heavy enough to sink straight to the bottom.

Sprayer

A sprayer makes pond chemical application easy. Most liquid chemicals are more effective when they’re sprayed over the target weed, and a tank sprayer, like The Pond Guy® Specialty Pond Sprayer, is designed just for this purpose. The 2.75-gallon pond tool features a wide-mouth fill top that minimizes accidental spills, a brass corrosive-resistant handle, and a high-pressure tank that allows you to spray hard-to-reach weeds.

Invest in a separate sprayer just for pond chemicals. If you use lawn and garden chemicals in the same sprayer that you use on your pond, doing so can be toxic to fish and other aquatic life as residue could be left behind. Keep your fish and pond plants healthy and happy: Use a different tool for the job.

Granular Spreader

The final must-have tool is a granular spreader, which helps you disperse granular herbicides evenly over your target area – and that means a more effective weed kill-off. The rust-proof Earthway® Granular Hand Spreader holds 10 pounds of material in a large hopper and features an application adjuster that lets you control how much product is released with its smooth-action hand crank.

Pond Talk: If you could only have one pond-care tool in your toolbox, what would it be? Why?

Remove Weeds & Debris - Pond Logic® Pond Rake & Weed Cutter

There are rakes, razors, cutters…skimmers…is there a difference and which works best to clean the pond? | Pond & Lake Q&A

There are rakes, razors, cutters…skimmers…is there a difference and which works best to clean the pond?

There are rakes, razors, cutters…skimmers…is there a difference and which works best to clean the pond?

Bryan – Pasadena, TX

Yes. You could sweep your garage with a toothbrush. It’s possible. Some people – who have a much lower tolerance for dirt than most – might even do it. But when the time comes to do the job, you’re much more likely to choose a push broom, or better still, a shop vac. Why? Because they’re the right tools for the job. The same principles apply when you’re cleaning your pond. If you pick the proper tool, the job will be a lot easier – and much more effective.

So what, then, is the right tool for the job? It all depends on the conditions of your pond – and on what you hope to accomplish. The following list gives a brief breakdown of the tools we recommend, and describes their respective strengths:

Airmax Weed Cutter. The perfect weapon in the fight against submerged, marginal and terrestrial weeds. Tackle everything from lily pads and pond weeds to cattails and phragmites with this double-sized, 28” wide weed cutter, featuring a two-piece, 11’ long aluminum handle for extended reach.
Weed Razor and Weed Razor Pro. This unique, v-shaped aquatic weed cutter features razor-sharp blades designed to shear almost any type of rooted aquatic vegetation, including milfoil, lily pads, pond weeds and cattails. It’s designed for maximum impact, and clears a 48” swath with each throw and retrieval. The Weed Razor Pro offers the added benefit of an adjustable cut from 12” to 62”, and makes it easy to cut nearly any aquatic vegetation in its path in no time flat.
Airmax Pond & Beach Rake. Whether you’re skimming floating aquatic vegetation from the water or looking for an effective way to remove weeds, algae, muck and debris from the pond bottom or beach, this versatile 36”-wide rake is indispensable. It comes with an 11’, two-piece aluminum handle for reach and a detachable float with 20’ of polypropylene rope, making it perfect for throwing and easy retrieval. As an added benefit, simply shorten the handle, and you have a professional-grade landscaping rake for dressing beach sand.

Weed Raker. One of the longest and deepest-digging lake rakes in the industry, this rake easily removes submerged lake and pond weeds right down to the root. It’s also superb for removing dead, decaying matter at the pond bottom to make short work of muck.

In smaller ponds and water features, pond skimmers can also help to remove debris – but they’re ineffective at large-scale debris removal in larger ponds, where water levels fluctuate and surface area is too large to allow all debris to reach the skimmer.

When you’re through cutting and raking aquatic growth from your pond, it’s also important to remove the results. If left in the water, cuttings will sink to the bottom, where they accumulate, form muck, and provide a natural growing environment for — you guessed it – more weeds.

Pond Talk: Which tools work best to keep your pond clean?

Lake Rake/Weed Eradicator Combo

Follow

Get every new post delivered to your Inbox.

Join 137 other followers