• Archives

  • Categories

  • Pages

What do I need to do to perform a spring cleanout? | Decorative Ponds & Water Gardens Q & A

What do I need to do to perform a spring cleanout?

Q: What do I need to do to perform a spring cleanout?

Christine – Ballston Spa, NY

A: Like it or not, deep cleaning your pond or water feature is one of those must-do chores in the spring. Though we could write an entire e-book on the subject, we’ve distilled the essentials into this handy step-by-step to-do list.

So pull on your waders and gloves. It’s time to get dirty!

1. Create a holding tank for your fish. First, fill a blue tub, large plastic bin or even a child’s wading pool with existing pond water, install a small aerator in it and turn the air on. Then, use a net to catch your fish and gently move them into the holding tank and cover with a net to prevent them from hopping out. This will be their home away from home while you’re performing your cleanout.

2. Drain the pond. Use a pump and a drain hose to siphon all the water from the pond.

3. Get out the power washer. Once all the water has been drained, power wash your pond’s rocks, decor—anything that has developed a layer of dead algae and/or accumulated debris. Scrub away stubborn debris with an oxygen-based cleaner like Pond Logic® Oxy-Lift™ Defense® Pond Cleaner.

4. Rinse, drain and repeat. As you power-wash off the debris and rinse the rocks and decor, pump the dirty water out of the pond. This may need to be repeated a few times, depending on how much gunk has accumulated.

5. Make rock, decor adjustments. With your rocks and decor sparkling clean, now is the time to adjust them and make sure they’re still solidly in place. This is also a perfect opportunity to add more rocks if your gravel-bottom pond needs them.

6. Check pond lights, thin plants. In addition to adjusting your rocks, you should also take the opportunity to ensure your pond lights are working properly, and your plants are thinned and positioned on shelves as you want them.

7. Clean out and reinstall pump/UV/filter. Once your pond is thoroughly cleaned out, re-install any plumbing that was removed for the winter, such as your pump, aerator, filter and ultraviolet light (it’s a great idea to invest in a new UV bulb at this time, too, as we recommend replacing it once a year).

8. Fill ‘er up. Refill your pond with water and add necessary water treatments. If you have hard water or city water, add a conditioner like Pond Logic® Water Conditioner; if your water is still slightly murky, add some Pond Logic® Clarity Defense®.

9. Re-acclimate the fish. Finally, prepare your fish for their newly cleaned home by adding some of the new water to their holding tank so they can adjust to the new water chemistry. Be sure to slowly acclimate the fish back to the pond just as you would when first adding them. To help them over the hump, consider adding some Pond Logic® Stress Reducer PLUS to make the transition smooth for your finned friends.

Take some time this spring to give your pond a good deep cleaning. It’ll take some work—but your pristine, well-cared-for water feature will be a fantastic reward, particularly when you’re lounging by it this summer!

Pond Talk: Share some spring cleaning tips that have worked well in your pond!

Lift Debris Away In Seconds - Pond Logic® Oxy-Lift™ Defense®

7 Spring Clean-Out Tips For Your Decorative Pond | Decorative Ponds & Water Gardens Q & A

7 Spring Clean-Out Steps For Your Decorative Pond How Should I Go About Performing A Spring Cleanout In My Water Garden?

Marilyn – Jackson, MI

Spring cleaning applies not only to the house, but your water garden as well. Here are 7 spring clean-out tips to get your pond off to a great start:

1.) Get a holding tank: Before you tend to your pond, have a holding tank ready for your koi and other fish. Make sure to house them using existing pond water and place a pond aeration kit in the tank to ensure oxygen levels remain high. Even though this is a temporary space for your fish, they may be startled by their new environment. It is always best to place some pond netting over the holding tank to ensure none of the fish jump out.

2.) Drain the pond: Once the fish are safely housed in their temporary holding tank, drain the pond with a pond pump and drain hose.

3.) Power wash: Power wash the rocks and remove any algae, muck and other debris build up. For stubborn debris that just won’t wash away, use Pond Logic® Oxy-Lift™ Defense® to take care the problem. Simply sprinkle over stubborn debris, wait 10 minutes and rinse away. We recommend rinsing and pumping out dirty water a few times to ensure a good cleaning.

4.) Make adjustments: At this point in the cleaning process with no water in the pond, it’s best to check for any rocks or plants that might need to be adjusted as some of the scenery may have been displaced during the power wash.

5.) Check the lights: This is great time to check any pond lights to ensure they are in working condition. Now is also a good time to add new pond lights if desired.

6.) Reconnect plumbing and filters: Reinstall any pumps, UV clarifiers, filters or spitters once the rest of the pond is clean, and get ready to refill and reintroduce your fish to your pond.

7.) Refill and re-acclimate: After you refill your pond, add Pond Logic® Water Conditioner to remove any chlorine and to detoxify heavy metals from the new water. Re-acclimate your fish to the new pond water by slowly adding some to their holding tank. We recommend using Pond Logic® Stress Reducer PLUS to your pond as well to help reduce any stress caused by transporting them.

Once done, congratulate yourself – you’re finished, it’s time to get back to enjoying your pond.

Pond Logic Clarity Defense

We just constructed out pond, how long should we wait to add fish? | Decorative Ponds & Water Gardens Q&A

We just constructed out pond, how long should we wait to add fish?

We just constructed out pond, how long should we wait to add fish?

Jay – Phoenix, AZ

When you create a new pond, you’re effectively building a new ecosystem from scratch. At the beginning, your pond’s waters might look clean, clear and inviting, but nature’s just getting started. Until the initial nitrogen cycle is complete, there’s still work to be done before fish can safely take up residence.

At its early stages, any new body of water – whether an indoor aquarium or a backyard pond – goes through the nitrogen cycle. This cycle begins when living organisms break down nitrogen through their natural digestive processes. Until that cycle is complete, concentrations of ammonia naturally build up in the water – and too much ammonia is extremely harmful to fish. Fortunately, with the introduction of natural bacteria in products like ourPond Logic® DefensePAC® to your pond, you can speed up the nitrogen cycle, making the pond safe for new fish in four to six weeks or less.

In addition to DefensePAC®, other products like Pond Logic® Stress Reducer PLUS and Pond Logic® Water Conditioner go a long way toward making new pond water inhabitable. Stress Reducer Plus helps fish to restore their natural protective slime coats, making them less vulnerable to illness. Water Conditioner helps to neutralize chlorine and other chemicals in the water that can lead to stress.

But simply adding DefensePAC®, Stress Reducer and Water Conditioner won’t tell you when your water is ready to support piscine life. For that, you’ll want to use our PondCare Master Liquid Test Kit, which tests water for pH, ammonia, and nitrite. When readings are consistently within healthy ranges – as clearly explained in the Master Liquid Test Kit’s documentation – you’re ready to welcome your new fish to their new home.

Pond Talk: Have you recently built a pond and are waiting to add fish?

DefensePAC®

Follow

Get every new post delivered to your Inbox.

Join 144 other followers