• Archives

  • Categories

  • Pages

Do I need a heater to overwinter my fish in the pond? | Decorative Ponds & Water Gardens Q & A

Q: Do I need a heater to overwinter my fish in the pond?

Q: Do I need a heater to overwinter my fish in the pond?

Pat – Far Hills, NJ

A: Unless you house warm-water fish like Plecostomus in your water feature, you won’t need a heater to heat things up. Most pond fishes, including koi and goldfish, will overwinter just fine in their outdoor digs because they go into a pseudo-hibernation state when water temperatures fall. Their metabolisms slow and they’re able to tolerate cooler water—even water that’s frigid enough to freeze.

If you live in a climate that experience those freezing temperatures, what we recommend is a de-icer or aerator (rather than a heater) to keep a hole in the ice. This hole allows for gas exchange, through which necessary gases like oxygen enter and harmful gases like ammonia escape.

Which option is right for you?

  • De-Icer: A de-icer’s purpose is to float on the surface and melt a hole in ice that has formed on a container of water, whether a koi pond or water garden. Unlike a heater that actually warms the entire body of water, a de-icer like the K&H™ Thermo-Pond 3.0 Pond De-Icer simply melts an opening in the ice sheet, thereby allowing for gas exchange.
  • Aerator: Rather than create a hole in the ice from above, an aerator, like the PondAir™ Aeration Kit, circulates the water below the ice sheet. In areas with relatively mild winters, that subsurface water movement will keep a hole in the ice that allows for gas exchange—but when temps really dip, an aerator may not be enough to maintain a vent hole.
  • De-Icer, Aerator Combo: An excellent and convenient option to consider is the PondAir™ & Thermo-Pond Combo. It combines both the Thermo-Pond and PondAir™ Aeration Kit, providing your water feature the one-two punch it needs to stay well-vented throughout the winter.

If temperatures in your area vary between above- and below-freezing, consider installing a ThermoCube®. The thermostatically controlled outlet turns on when air temperatures drop below 35° Fahrenheit and turns off when air temps rise above 45°F. This handy-dandy device will save you money, which is something we can all appreciate!

Pond Talk: What do you do to keep your finned pals comfortable in the winter?

The Ultimate in Winter Pond Protection - View Pond Logic® PondAir™ & Thermo-Pond Combo

The de-icer I purchased says it’s thermostatically-controlled. Why is it always running? | Decorative Ponds & Water Gardens Q & A

The de-icer I purchased says it’s thermostatically-controlled. Why is it always running?

The de-icer I purchased says it’s thermostatically-controlled. Why is it always running?
Bill – White Lake, MI

When backyard water features are home to year-round populations of fish, it’s vitally important to prevent long-term ice cover. Without a break in the ice, harmful gases produced by decaying leaves and other organic matter build up, threatening the well-being of wintering fish. To prevent that threat, many pond owners install thermostatically-controlled de-icers, which produce enough concentrated heat to keep a vent hole open during winter’s coldest months.

When a de-icer is thermostatically controlled, it is set to turn both on and off at certain temperatures. In theory, that makes good sense: if the water is cold, the de-icer goes to work, and when the water warms, it switches off – saving on unnecessary electricity costs. The problem, however, is that the water temperature in a frozen pond may not rise above the thermostat’s high-temperature shutoff threshold, leaving the de-icer in full heating mode all the time.

Naturally, we’ve given this issue some thought. And that’s why we strongly recommend the use of our Thermo Cube Thermostatically Activated Plug. Unlike a thermostatically-controlled de-icer, the Thermo Cube measures air – not water temperature. Thus, when the sun is shining, and air temperatures warm up, the Thermo Cube automatically cuts power to the de-icer, and turns it back on when the air temperature drops. The combination works flawlessly – applying heat when it’s required to keep the ice open, and shutting it off when it’s not.

Pond Talk: Do you use a thermocube along with your de-icer?

Pond Logic FeatureFix

Follow

Get every new post delivered to your Inbox.

Join 141 other followers