• Archives

  • Categories

  • Pages

How do I restart my aeration system after storing it for the winter? | Ponds & Lakes Q&A

How do I restart my aeration system after storing it for the winter?

Q: How do I restart my aeration system after storing it for the winter?

Allan – West Jordan, UT

A: Pond season is quickly on its way—and wouldn’t it be nice to restart your aeration system with the flip of an on-off switch? Unfortunately, it’s not quite that easy. If the aerators in your fish pond or lake were shut down for the winter, they’ll require some basic inspection and maintenance to ensure they’re ready to run.

Don’t worry. We’ve made the annual chore easy with these five aeration system maintenance tips.

1. Replace Your Air Filter

As part of your overall aeration system maintenance, the first thing to do is take a look at your air filter. Is it caked with dust and debris? Does it need to be replaced? A new air filter, like Airmax® SilentAir™ Air Filter, should ideally go in every six months or every three to four months if it’s in a dusty environment. A clean filter allows clean air to pump through the compressor, which means it will endure less wear and tear—and last longer.

You can try to clean the air filter, but its performance will still be reduced (note: never place a wet element back in the filter!). Many times, it’s easier to simply replace the filter element rather than the entire filter unit.

2. Check Your Diffusers

Next, take a look at your diffusers, particularly if it has been a few years since you’ve brought up the diffuser plates. Give them a light cleaning and inspection to make sure you see no cracks or tears. When running, a properly functioning diffuser should release small air bubbles; large bubbles may indicate some damage. If the diffuser sticks are beyond repair, replace them with Airmax® ProAir™ Membrane Diffuser Sticks.

3. Rebuild Your Pistons

Was your aeration system producing less air last year than the season before? The piston may be wearing out. Get out your Airmax® Piston Compressor Maintenance Kit and repair or replace any parts that are worn or malfunctioning. Quick repair of the compressor will ensure your fish pond or lake gets proper aeration all summer long.

4. Slowly Flick the Switch

Once you’ve performed these maintenance chores, introduce the aeration slowly. Doing so at full force may cause the water to mix too quickly, which can cause your fish to stress. Instead, run the system for an hour the first day, two hours the second day, four hours the next day—essentially, doubling the running time each day until your run time reaches 24 hours.

5. Check the Manual

Of course, if you get stuck or need technical guidance, see the Airmax® Pond Series™ Aeration System Product Manual for additional tips and maintenance instructions.

Pond Talk: How long does it take you to get your aeration system up and running in the spring?

Breathe Some Life Into Your Pond - Airmax® Aeration Systems

Follow

Get every new post delivered to your Inbox.

Join 143 other followers