Q: I think there is a leak in my water garden, but how do I know?
Abby – Pueblo, CO
A: What a conundrum! Determining whether you have a leak in your liner—and then finding and fixing it—can be a daunting task. But with a little detective work and these step-by-step instructions, your pond will be holding water again in no time.
A Leak or the Heat?
Let’s determine if you have a leaky pond in the first place. How much water are you losing per day? And what’s the temperature outside? On hot days, it’s common to lose up to an inch of volume from your water garden—but if it’s more than that, you may have a leak.
Finding the Leak
Common places for leaks to spring include around the pond’s perimeter, the area around your waterfall and pump, and your liner. When looking for the leak’s source, follow these steps:
Step 1 – Search for a Wet Spot: First, look for wet areas around the perimeter of your pond. Is water pooling somewhere? Are the weeds thicker or the grass lusher in one area than another? Check the low-lying areas where the liner may not be properly supported. If nothing looks amiss, head over to your waterfall pump.
Step 2 – Leak Check: The easiest way to determine whether the leak is in your liner or in your waterfall box is to turn off the waterfall pump (but keep your aeration going so the water stays aerated) and leave it alone for a few hours. When you come back:
- Is the water level the same? If so, your liner is not the culprit so you’ll need to check for problems with your waterfall box.
- Has the water level dropped? If so, you have a leaky liner. Jump to step 4.
Step 3 – Waterfall Worries: If your waterfall or waterfall box is the source of your leak, follow these steps to determine where the water could be escaping:
- Connections: First check the connections from the pump to the box. Are they loose and dripping, or are they tight?
- Cracks in the Box: Next, take a look at the waterfall box itself. Are there any cracks? Is the liner properly attached?
- Stream Leaks: Finally, inspect the rocks and liner around the waterfall and stream, making adjustments are needed. Try using some Waterfall Foam to stop water from flowing behind the rocks.
Step 4 – Your Leaky Liner: Finding a hole in a liner isn’t easy. But with a little perseverance, you can locate it and repair it. Here’s how:
- Track the Leak: Use Pond Logic® Pond Shade to visually track the leak. Simply add a few drops on the side and watch it as it finds its way to the leak. This will take some time, a few attempts—and patience.
- Let It Be: If you have trouble finding it with Pond Shade, let the water slowly go down. (Depending how low it goes, you may need to temporarily relocate your fish.) The water level should stabilize, which will allow you to visually inspect the first few inches of liner above the water surface for the hole.
- Repair the Leak: Once you find the hole, patch it up with self adhesive Liner Patch or use some Gold Label Pond Sealer.
Good luck with your search!
Pond Talk: Have you ever had a leak in your pond? How did you find out where it was coming from?
Filed under: Tubing, Water Gardens & Features, Waterfall | Tagged: fix leak in pond, fix pond leak, Leak, leak in liner, leak in pond, liner leak, liner patch, stream leak, water garden leak, waterfall leak | Leave a Comment »