Q: When can I put my fountain back in my pond?
John – Pataskala, OH
A: Fountains do more than create an attractive splash in your pond or lake. They also allow for greater gas exchange at the water’s surface, expelling dangerous ammonia and drawing in healthy oxygen for your fish and other sub-surface critters.
When spring rolls around, it’s time to reinstall your fountain – but before you do, be sure to check your Farmer’s Almanac or with your meteorologist. Make sure there’s little chance of the pond icing over again.
Once you’re sure that temps will remain above freezing, perform some quick maintenance tasks before submerging the fountain and anchoring it into position, including:
- Clean It Up: Pull out a power washer and spray down the motor so built-up material doesn’t trap heat.
- Check the Cord: Inspect the power cord for cuts.
- Make It Muskrat-Proof: Protect the cord with ratcord (power cord sleeve) if you have muskrats in your area.
- Maintenance Visit: Send the motor in for regular seal and oil maintenance if you haven’t done so in a few years.
When you put your fountain back into place, make sure the mooring lines are snug enough to keep it secure. When anchoring with blocks at the bottom of the pond, make sure the lines are spread far enough apart so the fountain doesn’t spin from the force of the motor, which could cause the lines to get tangled.
As soon as you’ve put your fountain back in place, add your first dose of Pond Dye to the water so the spraying action will disperse the color evenly. Nature’s Blue™ or Black DyeMond™ will shade the water, minimize algae blooms and give your landscape a natural-looking pop of color
Pond Talk: What’s your fountain’s favorite spray pattern?
Filed under: Aeration, Fountain, Pond & Lake, Pond Clear, Water Clarity, Water Quality | Tagged: Dye, fountain, fountains, kasco fountain, maintenance, pond dye, ratcord, remove fountain, running fountain | Leave a comment »