• Archives

  • Categories

  • Pages

  • Follow me on Twitter

I changed the air filter on my compressor, but it’s still not pumping much air. Is it time for a maintenance kit? | Ponds & Lakes Q&A

Q: I changed the air filter on my compressor, but it’s still not pumping much air. Is it time for a maintenance kit?

Q: I changed the air filter on my compressor, but it’s still not pumping much air. Is it time for a maintenance kit?

Doug – Hamilton, KY

A: Regular maintenance will extend the life of your compressor, but an air compressor can lose its pumping power for a number of reasons. To help deduce what the problem could be, start with a quick evaluation:

  • Is your air filter cleaned or replaced? (Check!)
  • Is your intake filter and aeration cabinet clean?
  • Have you checked the diffusers for clean membrane sticks?
  • Have you checked your airline for any loose connections?

If you’ve checked off these chores and your compressor is still low on the air flow, it might be time for a maintenance kit – especially if it’s been a while since you’ve installed one.

Maintenance kits are available for both shallow water (diaphragm) and deep water (piston) compressors. They include replaceable parts like O-rings, seals and hardware that’ll get your compressor humming again. You’ll need some basic tools, like a screw driver and Allen wrench, but they’re fairly easy to install. Simply watch one of our kit installation maintenance videos and follow the included step-by-step instructions.

If you need specific replacement parts, like an air filter, diffuser stick or extra air line, be sure to check our inventory. Chances are good we’ll have just what you need.

Waiting too long to install a maintenance kit could cause the device to become too warm, which will hasten the breakdown of those replaceable parts. Before long, you’ll need to replace the compressor. Save your money: Take the time to maintain your current compressor instead of spending a pretty penny on a new one!

Plus, if you plan on running your aeration system this coming winter, do your maintenance now so you don’t have to chip your system out of the ice in the middle of a cold snap.

Pond Talk: How often do you do basic maintenance on your air compressor?

Restore Aeration to Full Potential - Piston Compressor Maintenance Kits

What kind of aeration maintenance should I be doing this season? | Ponds & Lakes Q&A

Q: What kind of aeration maintenance should I be doing this season?

Q: What kind of aeration maintenance should I be doing this season?

Bill- Cannon Falls, MN

A: With spring in full bloom, now is the time to tune up your aeration system. It doesn’t matter if you’re turning it back on after the long winter or if it has been running since last year – your aeration system is a very important in keeping your pond healthy, so keep it humming.

Spring Start Up
If you’re turning your aeration system back on in the spring, the airlines traveling from the air compressor to the diffuser plates may contain ice. Those frozen blockages will prevent oxygen from flowing into your pond. To break up the ice, follow these three steps:

  1. Measure 1 cup of isopropyl alcohol for each airline that runs out a plate.
  2. Turn on your compressor to push the alcohol through line and free any ice blockages.
  3. Follow initial startup procedure to avoid “shocking” in the pond.

Weekly Chores
Every week throughout the pond season, check the side cabinet’s air filter for debris, particularly if you live in a dry, dusty environment. Clean your air filter as needed because when it becomes clogged, your compressor and pump are forced to work harder – which means more wear and tear on those moving parts. When you clean the filter, make sure it’s completely dry before placing it back inside the cabinet.

Every 3 to 6 Months
Several times a year, block out some weekend time to perform these maintenance tasks:

  • Replace the air filter. Although you’ve been cleaning your air filter regularly, you will need to replace it every three to six months. We recommend Airmax® SilentAir™ RP Series Compressor Air Filter for Pond and Lake Series Systems. While you’re in the cabinet, make sure the aeration unit’s cooling fan is operating properly.
  • Check your pressure gauge. For Pond and Lake Series Aeration Systems, mark pressure gauge upon initial start up and check it every few months. Normal operation will range between 5 to 10 psi.

Every 12 to 24 Months
In addition to cleaning your aerator’s membrane sticks, you should also plan to do the following tasks depending on what aeration system you have installed in your lake or pond:

Your aeration system requires regular maintenance to keep it performing at its best. Doing so will extend the lifespan of the unit and ensure your system is running as efficiently as possible.

Pond Talk: What else do you do to make sure your aeration system is working well when you start it back up in the spring?

Kill Water Lilies and Other Emergent Weeds - Airmax(r) SilentAir(t) Piston Compressor Maintenance Kit

Follow

Get every new post delivered to your Inbox.

Join 201 other followers