• Archives

  • Categories

  • Pages

How do I restart my aeration system after storing it for the winter? | Ponds & Lakes Q&A

How do I restart my aeration system after storing it for the winter?

Q: How do I restart my aeration system after storing it for the winter?

Allan – West Jordan, UT

A: Pond season is quickly on its way—and wouldn’t it be nice to restart your aeration system with the flip of an on-off switch? Unfortunately, it’s not quite that easy. If the aerators in your fish pond or lake were shut down for the winter, they’ll require some basic inspection and maintenance to ensure they’re ready to run.

Don’t worry. We’ve made the annual chore easy with these five aeration system maintenance tips.

1. Replace Your Air Filter

As part of your overall aeration system maintenance, the first thing to do is take a look at your air filter. Is it caked with dust and debris? Does it need to be replaced? A new air filter, like Pond Logic® SilentAir™ Air Filter, should ideally go in every six months or every three to four months if it’s in a dusty environment. A clean filter allows clean air to pump through the compressor, which means it will endure less wear and tear—and last longer.

You can try to clean the air filter, but its performance will still be reduced (note: never place a wet element back in the filter!). Many times, it’s easier to simply replace the filter element rather than the entire filter unit.

2. Check Your Diffusers

Next, take a look at your diffusers, particularly if it has been a few years since you’ve brought up the diffuser plates. Give them a light cleaning and inspection to make sure you see no cracks or tears. When running, a properly functioning diffuser should release small air bubbles; large bubbles may indicate some damage. If the diffuser sticks are beyond repair, replace them with Pond Logic® ProAir™ Membrane Diffuser Sticks.

3. Rebuild Your Pistons

Was your aeration system producing less air last year than the season before? The piston may be wearing out. Get out your Pond Logic® Piston Compressor Maintenance Kit and repair or replace any parts that are worn or malfunctioning. Quick repair of the compressor will ensure your fish pond or lake gets proper aeration all summer long.

4. Slowly Flick the Switch

Once you’ve performed these maintenance chores, introduce the aeration slowly. Doing so at full force may cause the water to mix too quickly, which can cause your fish to stress. Instead, run the system for an hour the first day, two hours the second day, four hours the next day—essentially, doubling the running time each day until your run time reaches 24 hours.

5. Check the Manual

Of course, if you get stuck or need technical guidance, see the Airmax® Aeration System Product Manual for additional tips and maintenance instructions.

Pond Talk: How long does it take you to get your aeration system up and running in the spring?

Breathe Some Life Into Your Pond - Airmax® Aeration Systems

How often do I need to replace the air filter on my (Airmax) Aeration system? | Pond & Lakes Q&A

How often do I need to replace the air filter on my (Airmax) Aeration system?

How often do I need to replace the air filter on my (Airmax) Aeration system?
Mike – Flat Rock, MI

First, for people strapped for time, we’ll go with the short answer. Under ordinary circumstances, we recommend filter replacements every six months. If you live in a dry, dusty environment, it’s best to change the filter every three to four months. For Airmax Filters, we strongly recommend Airmax Silent Air Black Air Filters (Complete), and Airmax Silent Air Replacement Air Filter Elements for routine replacement.

Now, for those who want the rest of the story, here’s the long answer, which, incidentally, also makes for fascinating cocktail party conversation. To make sense of our recommended filter replacement schedule, it’s important to understand why it’s even necessary at all.

First and foremost, regular filter changes will prevent the premature failure of your filter compressor pump. As it turns out, filter pumps are designed to perform best with clean filters. When filters become clogged, the compressor is forced to work harder. When it works harder, its wear parts are subject to greater wear and tear. And if a filter is left unchanged for too long, an overworked pump is likely to fail. Accordingly, given the cost of replacing a pump, regular filter changes are a much more economical alternative.

In addition to the stress they place on pumps, dirty filters won’t allow the compressor to do the job they’re intended to do, circulate pond water. As a result, the entire pond ecosystem feels the effects. With regular filter changes, pond water is safer for fish and plants, and clearer and more enjoyable for the people who care for them.

Occasionally, our customers ask whether filters can be cleaned and reused. While it seems like a logical option, filters can’t be effectively cleaned – and their performance is significantly compromised. We also strongly discourage the installation of a wet element in a filter system, given the potential to further stress the pump and to unintentionally introduce foreign contaminants into the pond.

As an economical alternative to filter cleaning, we recommend the use of Airmax Silent Air Replacement Air Filter Elements, rather than installing a complete filter unit. The savings are significant – and the filter system will be ready to perform flawlessly for another three to six months.

Happy aerating.

Pond Talk: Do you notice the performance of your aeration system begin to decline as the filter becomes clogged?

Airmax SilentAir Complete Air Filter

Follow

Get every new post delivered to your Inbox.

Join 123 other followers