• Archives

  • Categories

  • Pages

What kind of aeration maintenance should I be doing this season? | Ponds & Lakes Q&A

Q: What kind of aeration maintenance should I be doing this season?

Q: What kind of aeration maintenance should I be doing this season?

Bill- Cannon Falls, MN

A: With spring in full bloom, now is the time to tune up your aeration system. It doesn’t matter if you’re turning it back on after the long winter or if it has been running since last year – your aeration system is a very important in keeping your pond healthy, so keep it humming.

Spring Start Up
If you’re turning your aeration system back on in the spring, the airlines traveling from the air compressor to the diffuser plates may contain ice. Those frozen blockages will prevent oxygen from flowing into your pond. To break up the ice, follow these three steps:

  1. Measure 1 cup of isopropyl alcohol for each airline that runs out a plate.
  2. Turn on your compressor to push the alcohol through line and free any ice blockages.
  3. Follow initial startup procedure to avoid “shocking” in the pond.

Weekly Chores
Every week throughout the pond season, check the side cabinet’s air filter for debris, particularly if you live in a dry, dusty environment. Clean your air filter as needed because when it becomes clogged, your compressor and pump are forced to work harder – which means more wear and tear on those moving parts. When you clean the filter, make sure it’s completely dry before placing it back inside the cabinet.

Every 3 to 6 Months
Several times a year, block out some weekend time to perform these maintenance tasks:

  • Replace the air filter. Although you’ve been cleaning your air filter regularly, you will need to replace it every three to six months. We recommend Airmax® SilentAir™ RP Series Compressor Air Filter for Pond and Lake Series Systems. While you’re in the cabinet, make sure the aeration unit’s cooling fan is operating properly.
  • Check your pressure gauge. For Pond and Lake Series Aeration Systems, mark pressure gauge upon initial start up and check it every few months. Normal operation will range between 5 to 10 psi.

Every 12 to 24 Months
In addition to cleaning your aerator’s membrane sticks, you should also plan to do the following tasks depending on what aeration system you have installed in your lake or pond:

Your aeration system requires regular maintenance to keep it performing at its best. Doing so will extend the lifespan of the unit and ensure your system is running as efficiently as possible.

Pond Talk: What else do you do to make sure your aeration system is working well when you start it back up in the spring?

Kill Water Lilies and Other Emergent Weeds - Airmax(r) SilentAir(t) Piston Compressor Maintenance Kit

I bought an aeration system this year. What maintenance should I be doing? | Ponds & Lakes Q&A

Q: I bought an aeration system this year. What maintenance should I be doing?

Q: I bought an aeration system this year. What maintenance should I be doing?

Gary – Saginaw, MI

A: Congratulations on your purchase of an Airmax® Aeration System—and good for you for thinking about regular maintenance, which will keep it operating well for years to come. Here are some things to inspect on a routine basis:

  • Check Your Cooling Fan and Pre-Filter: Regularly clean out your pre-filter and check to see that the fan is indeed operating. Hot air should be blowing out, not air being pulled in. An easy way to remember to do this is to always check your fan and shake off your pre-filter when you cut your lawn.
  • Check Your Air Pressure: Check to see that your air pressure has not risen or dropped significantly. Normal operation will range between 5 and 10 psi. Also be sure to check your pressure relief valve to make sure no air is escaping.
  • Check Your Air Filter: Clean and replace your air filter every three to six months, depending on your environment, and do not place a wet air filter back into the unit. For deep-water units, use the Pond Logic® SilentAir™ Piston Compressor Air Filter; for shallow-water units, use the Pond Logic® SilentAir™ LR Series Air Filter.
  • Purge Your Membrane Sticks: Once per year, purge your membrane diffuser sticks. See the product manual for additional instructions.
  • Use the Maintenance Kit: Finally, be sure to use your maintenance kit for the system you have installed. For shallow-water systems, use the Pond Logic® SilentAir™ Diaphragm Compressor Maintenance Kit every 12 months to keep your diaphragm compressor running its best. For deep-water systems, use the Pond Logic® SilentAir™ Piston Compressor Maintenance Kit every 24 months to keep your piston compressor humming.

Remember, if you have any questions, need additional information or want to read through some troubleshooting tips, refer to your product manual.

Pond Talk: What is your aerator maintenance routine? Do you have any tips to share?

Maximize System Performance - Pond Logic® SilentAir™ Piston Compressor Air Filter

Follow

Get every new post delivered to your Inbox.

Join 139 other followers