• Archives

  • Categories

  • Pages

I’m looking to cut back on energy costs. Can I shut off my waterfall at night? | Decorative Ponds & Water Gardens Q & A

Q: I’m looking to cut back on energy costs. Can I shut off my waterfall at night?

Q: I’m looking to cut back on energy costs. Can I shut off my waterfall at night?

Gita – San Tan Valley, AZ

A: Energy costs have certainly been on the incline lately, and so it makes perfect sense to search for ways to save some of your hard-earned cash. If you must – though it’s not ideal – you can shut off your waterfall at night as long as you have your aeration system operating. It’ll keep the oxygen flowing overnight.

However, consider the hidden costs that you could be incurring:

Dealing with Poor Fish Health:

Still, quiet water – even just during the overnight hours – means that fewer water molecules are circulating and making contact with oxygen-rich air at the pond’s surface. The stagnant water will be unable to release dangerous gases, like ammonia, and absorb life-giving oxygen. That could cause your fishes’ immune systems to suffer, which could lead to disease or worse.

Replacing Beneficial Bacteria:

For your filtration system to remove contaminants from the water, it needs moving water flowing through it – so if your pump is off, your water’s not moving. If all the water drains out of your filter, you could wind up with a loss of the beneficial bacteria that live on the media inside, which means you’ll need to replace them later.

Managing Algae Blooms:

Moving water helps to keep debris suspended in the water column and pulled through the skimmer and filter for efficient removal. But if the pump is turned off, that debris will settle to the bottom of the pond and build up, creating a dense food source for nuisances like algae. When it starts to bloom, it’ll take your time, energy and some algaecide to clear up – which can equal a pretty penny.

Pond pump manufacturers understand that water gardeners are concerned about operating costs, so many of the designs on the market today, including the RapidFlo™ and MagFlo™ Pump, are energy efficient and consume relatively little electricity. Pumps that used to cost $100 a month or more to run have been replaced by models that cost as little as $12 a month. Now that’s some serious savings!

Pond Talk: Besides shutting down your waterfall pump at night, what are some other ways you’ve cut water garden expenses?

Breathe Life Into Your Pond - Airmax (r) PondAir(t) Aeration Kits

I’m getting tired of pulling weeds by hand. Any tips for removal?| Ponds & Lakes Q&A

Q: I’m getting tired of pulling weeds by hand. Any tips for removal?

Q: I’m getting tired of pulling weeds by hand. Any tips for removal?

Maynard – Monroe, CT

A: Weeds just seem to keep growing and growing, don’t they? No matter how many times you pull on your hip waders, trudge down to the pond and pull out those pesky pond pests, they just grow back thicker than ever.

Part of the challenge, too, is that many herbicides, including Shoreline Defense® are prohibited in some states. If you live in one of these places, you have no choice but to manually or mechanically remove pond weeds.

Thank goodness for these trusty tools. They make the weeding chore a breeze – well, at least a little easier.

Weed Cutter

A weed cutter, like the Weed Cutter and the Weed Razer™, mechanically slices through weeds at their base so they can then be raked out.

The 28-inch, double-sided Weed Cutter features a two-piece, rust-proof, powder-coated aluminum handle that’s 11 feet long. It’s great for removing floating aquatic vegetation, marginal weeds and cattails that extend past the pond’s edge.

The V-shaped Weed Razer™ clears a 4-foot-wide path in pond weeds by sinking to the bottom and slicing through submerged weeds like watermilfoil, cattails and lily pads as you pull it across the pond. The razor-sharp tool weighs just 8 pounds, making it light enough to toss 30 feet or more yet heavy enough to sink straight to the bottom.

Pond Rake and Skimmer

A pond rake or skimmer pulls, gathers and removes dead debris from the surface or the bottom of a pond.

Debris on the surface of a pond, like algae or freshly cut pond weeds, can sink to the bottom and start to decay, adding to the muck and detritus that’s already there. All that debris degrades water quality, compromises fish health, provides a nutrient source for nuisance plants, and can even affect chemical treatments’ ability to work.

A floating pond rake, like the PondSkim™ Debris Skimmer, or a sub-surface pond rake, like the Pond & Beach Rake with float attachment, lends a long helping hand. Elongated by rope so you can easily get the hard-to-reach and deep-water growth, both rakes work by bringing those weeds back to shore.

Weed Prevention

Though you’ll have a tough time fighting Mother Nature and stopping her from propagating pond weeds, you can slow her down by following up your weed-whacking chores with treatments of MuckAway™ and Pond Dye. MuckAway’s™ beneficial bacteria will eliminate bottom-of-the-pond muck that fertilizes pond weeds, while Pond Dye will shade the water and prevent UV rays from accelerating weed growth.

Pond Talk: What manual or mechanical weed-killing tips can you share with fellow hobbyists?

Cuts Through the Toughest Weeds - The Pond Guy(r) Weed Cutter

Follow

Get every new post delivered to your Inbox.

Join 144 other followers