• Archives

  • Categories

  • Pages

Why is my water foamy? | Decorative Ponds & Water Gardens Q & A


Q: Why is my water foamy?

Q: Why is my water foamy?

Luke- Belen, NM

A: Is foamy water making your pond look more like the inside of a washing machine than an aquatic oasis? All that bubbly white or gray buildup is likely being caused by an excess of organic material in the water.

Accumulation happens when too many fish are living in the pond, you’re overfeeding them, filtration is inadequate or there’s runoff seeping into your water garden. Then, as the water flows down your waterfall, air and water collide, causing the proteins and other organics to be trapped inside bubbles rather than turning into ammonia and nitrites. Air-water collision is why the foam forms, particularly the base of your waterfall.

What’s the solution?

Short-term, you can change out part of the pond’s water to remove the foam. When you do, be sure to add some Pond Logic® Stress Reducer PLUS to the fresh water, which will form a beneficial slime coat on your fish and make tap water safe for them. In addition, add Pond Logic® Defoam™ to your water. Safe for fish, plants and wildlife, you simply shake the can and pour its contents into the pond. The foam will disappear in no time.

Long-term, you have several options:

  • Increase Filtration: Boost your filtration by adding plants to your pond or increasing the capacity of your existing filtration system.
  • Relocate Fish: Too many fish will produce excess waste, which means more foam. The rule is to allow 1 inch of adult fish per square foot of surface area, so if you have too many koi or goldfish in your pond, you might want to think about finding new homes for some of them.
  • Cut Back on Meals: If you’re feeding your fish too much or too often, the excess food adds to the extra organic material in your pond’s water. Only feed your fish an amount they’ll eat in a few minutes.
  • Add Nutrient-Eating Bacteria: To help break down the nutrient load in the water, add beneficial bacteria in such as, LiquidClear™ to work. They digest the dead organics in the pond, making the water crystal clear and foam free.
  • Aerate the Water: Aeration will also help reduce the nutrient load by circulating the water column and feeding fresh oxygen to the busy bacteria.

Foamy water can be a nuisance, but once you achieve some balance in your pond’s ecosystem, those bubbles will disappear in no time.

Pond Talk: If you have to reduce the fish population in your pond, how do you find new homes for them?

Eliminate Unsightly Pond Foam - Pond Logic(r) Defoam(tm)

4 Responses

  1. How do I find new homes for my fish? Since many of them have been together for about 11 years, shouldn’t they stay in the same group?

    • Hi Susan – Fish will school even if they do not know each other. Finding homes for koi can be challenging. I would recommend asking friends you know with ponds or finding a local koi or pond club if anyone would like koi. Other options include a local pond store or pet store for a trade.

    • If there is a watergarden society close, there is always a new member who is glad to be given freebe’s.

  2. The last few years I’ve been setting up a 35 gallon water garden and in the spring, when it’s ready I buy about four kois usually around two inches long. In the fall I tear down that water garden and I look for someone with a pond big enough for kois. The owners are glad to come over and pick up the fish for their pond. Then I start all over again the next spring with new kois. .

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

Follow

Get every new post delivered to your Inbox.

Join 144 other followers

%d bloggers like this: