• Archives

  • Categories

  • Pages

The temperatures are rising, so when do I start using my ClearPAC PLUS?| Ponds & Lakes Q&A

Q: The temperatures are rising, so when do I start using my ClearPAC PLUS?

Q: The temperatures are rising, so when do I start using my ClearPAC PLUS?

Sharon – Waynesboro, GA

A: Inside your ClearPAC® PLUS box, you’ll find everything you need to keep your lake clean and clear this spring and summer. The five components, when used as directed, address the root of the most common pond problems by tackling excess nutrients and shielding the water from algae-feeding sunlight.
When should you start using ClearPAC® PLUS? It all depends on your water temperature. Let’s take a closer look at when and how to best use the products in your super-pack.

  • Pond Dye: As soon as the ice melts on your pond or lake, add your Nature’s Blue™ Pond Dye. The dye is not temperature-sensitive so it can be used even when water temps are too cold for beneficial bacteria products. Pond Dye does more than color your water and add to your landscape’s aesthetic; it also shades it from sunlight, which can kick-start algae blooms as the mercury rises.
  • PondClear™ and MuckAway™: When water temperatures rise to a consistent 50°F, you can start using the beneficial bacteria found in PondClear™ and MuckAway™ to break down nutrients suspended in your water column and muck on the bottom of your pond. These products can be used at the same time as your Pond Dye and EcoBoost™.
  • EcoBoost™: This bacteria booster that has no temperature restrictions, so it can be used year-round to bind phosphates that find their way into your pond or lake. You can use EcoBoost™ throughout the spring to give you a head start on pond season.
  • Algae Defense® : To be used only as needed, this algae-destroyer treats troublesome floating filamentous algae, bottom growing chara and the planktonic algae when it’s green and growing. Use Algae Defense® when the water temperature in your pond or lake is above 60°F. Don’t use Algae Defense® if you keep koi or trout in your lake.

After treating your pond with ClearPAC® PLUS, don’t forget to remove dead algae and debris with your Pond & Beach Rake. Doing so will remove the decaying vegetation and prevent them from feeding the algae—which will ultimately help your Pond Dye, PondClear™, MuckAway™, EcoBoost™ and Algae Defense® work even better!

Pond Talk: Has spring sprung in your area of the country?

Keep Your Pond Clean and Clear - Pond Logic(r) ClearPAC® PLUS

How do I know if my filtration system is adequate for my pond? | Decorative Ponds & Water Gardens Q & A

Q: How do I know if my filtration system is adequate for my pond?

Q: How do I know if my filtration system is adequate for my pond?

Roger – Grayson, GA

A: Clean, clear water is a must-have in any water feature. It allows you to see those gorgeous koi and goldfish swimming below the surface. It shows that you have excellent water quality, with plenty of oxygen for your pond’s inhabitants—including the microscopic ones, like beneficial bacteria. And it puts off no offensive odors, which means you can host shindigs by your water garden without scaring off your friends.

When your water quality is suffering, your pond is telling you that your filtration isn’t up to par. Here are four clear signs that say you need to kick it up a notch.

  1. Algae Blooms, Clarity Concerns: If you have a filtration system in place but you still have water clarity issues and algae blooms, that’s an obvious indicator that you need an upgrade. When selecting a more powerful filtration system, like our AllClear™ PLUS Pressurized Filters with a built-in ultraviolet clarifier, make sure it’s sized appropriately for your pond and its nutrient load.
  2. Fish Frenzy: If your pond’s resident fish have multiplied and grown over the years, then you’re likely overdue for a more powerful filter system. Most filter systems are marketed for a minimal fish load, so too many fish producing waste will overload the system. Remember: The rule is to allow 1 inch of adult fish per square foot of surface area. If you have too many koi or goldfish in your pond, you should think about finding new homes for some of your finned friends or increasing your filtration.
  3. Toxic Test Results: Test your pond’s water with one of our Master Test Kits to find out what your ammonia, nitrite and phosphate levels are. If you see high ammonia levels or if your fishes’ health has been suffering, the pond lacks proper filtration.
  4. Foamy Falls: Have you seen foam build up at the base of your waterfall or stream? All that frothiness, which is caused by excess protein and oil excreted by fish and other pond dwellers, can be a sign of excessive nutrient levels caused by inadequate filtration. A higher-powered filter system can help remove and dissipate that foam.

If you have a waterfall filter box, you can easily boost your filtration system’s water-cleaning power by adding Matala® Filter Pads. With four different densities—low, medium, high and super high—you can mix and match them to suit your pond’s unique needs.

Pond Talk: What telltale sign told you that it was time to increase your filtration system?

3 Types of Filtration, 1 Powerful Unit - Pond Logic (r) AllClear(t) PLUS Pressurized Filters

Follow

Get every new post delivered to your Inbox.

Join 139 other followers