• Archives

  • Categories

  • Pages

What do I need to do to perform a spring cleanout? | Decorative Ponds & Water Gardens Q & A

What do I need to do to perform a spring cleanout?

Q: What do I need to do to perform a spring cleanout?

Christine – Ballston Spa, NY

A: Like it or not, deep cleaning your pond or water feature is one of those must-do chores in the spring. Though we could write an entire e-book on the subject, we’ve distilled the essentials into this handy step-by-step to-do list.

So pull on your waders and gloves. It’s time to get dirty!

1. Create a holding tank for your fish. First, fill a blue tub, large plastic bin or even a child’s wading pool with existing pond water, install a small aerator in it and turn the air on. Then, use a net to catch your fish and gently move them into the holding tank and cover with a net to prevent them from hopping out. This will be their home away from home while you’re performing your cleanout.

2. Drain the pond. Use a pump and a drain hose to siphon all the water from the pond.

3. Get out the power washer. Once all the water has been drained, power wash your pond’s rocks, decor—anything that has developed a layer of dead algae and/or accumulated debris. Scrub away stubborn debris with an oxygen-based cleaner like Pond Logic® Oxy-Lift™ Defense® Pond Cleaner.

4. Rinse, drain and repeat. As you power-wash off the debris and rinse the rocks and decor, pump the dirty water out of the pond. This may need to be repeated a few times, depending on how much gunk has accumulated.

5. Make rock, decor adjustments. With your rocks and decor sparkling clean, now is the time to adjust them and make sure they’re still solidly in place. This is also a perfect opportunity to add more rocks if your gravel-bottom pond needs them.

6. Check pond lights, thin plants. In addition to adjusting your rocks, you should also take the opportunity to ensure your pond lights are working properly, and your plants are thinned and positioned on shelves as you want them.

7. Clean out and reinstall pump/UV/filter. Once your pond is thoroughly cleaned out, re-install any plumbing that was removed for the winter, such as your pump, aerator, filter and ultraviolet light (it’s a great idea to invest in a new UV bulb at this time, too, as we recommend replacing it once a year).

8. Fill ‘er up. Refill your pond with water and add necessary water treatments. If you have hard water or city water, add a conditioner like Pond Logic® Water Conditioner; if your water is still slightly murky, add some Pond Logic® Clarity Defense®.

9. Re-acclimate the fish. Finally, prepare your fish for their newly cleaned home by adding some of the new water to their holding tank so they can adjust to the new water chemistry. Be sure to slowly acclimate the fish back to the pond just as you would when first adding them. To help them over the hump, consider adding some Pond Logic® Stress Reducer PLUS to make the transition smooth for your finned friends.

Take some time this spring to give your pond a good deep cleaning. It’ll take some work—but your pristine, well-cared-for water feature will be a fantastic reward, particularly when you’re lounging by it this summer!

Pond Talk: Share some spring cleaning tips that have worked well in your pond!

Lift Debris Away In Seconds - Pond Logic® Oxy-Lift™ Defense®

How do I restart my aeration system after storing it for the winter? | Ponds & Lakes Q&A

How do I restart my aeration system after storing it for the winter?

Q: How do I restart my aeration system after storing it for the winter?

Allan – West Jordan, UT

A: Pond season is quickly on its way—and wouldn’t it be nice to restart your aeration system with the flip of an on-off switch? Unfortunately, it’s not quite that easy. If the aerators in your fish pond or lake were shut down for the winter, they’ll require some basic inspection and maintenance to ensure they’re ready to run.

Don’t worry. We’ve made the annual chore easy with these five aeration system maintenance tips.

1. Replace Your Air Filter

As part of your overall aeration system maintenance, the first thing to do is take a look at your air filter. Is it caked with dust and debris? Does it need to be replaced? A new air filter, like Airmax® SilentAir™ Air Filter, should ideally go in every six months or every three to four months if it’s in a dusty environment. A clean filter allows clean air to pump through the compressor, which means it will endure less wear and tear—and last longer.

You can try to clean the air filter, but its performance will still be reduced (note: never place a wet element back in the filter!). Many times, it’s easier to simply replace the filter element rather than the entire filter unit.

2. Check Your Diffusers

Next, take a look at your diffusers, particularly if it has been a few years since you’ve brought up the diffuser plates. Give them a light cleaning and inspection to make sure you see no cracks or tears. When running, a properly functioning diffuser should release small air bubbles; large bubbles may indicate some damage. If the diffuser sticks are beyond repair, replace them with Airmax® ProAir™ Membrane Diffuser Sticks.

3. Rebuild Your Pistons

Was your aeration system producing less air last year than the season before? The piston may be wearing out. Get out your Airmax® Piston Compressor Maintenance Kit and repair or replace any parts that are worn or malfunctioning. Quick repair of the compressor will ensure your fish pond or lake gets proper aeration all summer long.

4. Slowly Flick the Switch

Once you’ve performed these maintenance chores, introduce the aeration slowly. Doing so at full force may cause the water to mix too quickly, which can cause your fish to stress. Instead, run the system for an hour the first day, two hours the second day, four hours the next day—essentially, doubling the running time each day until your run time reaches 24 hours.

5. Check the Manual

Of course, if you get stuck or need technical guidance, see the Airmax® Pond Series™ Aeration System Product Manual for additional tips and maintenance instructions.

Pond Talk: How long does it take you to get your aeration system up and running in the spring?

Breathe Some Life Into Your Pond - Airmax® Aeration Systems

Follow

Get every new post delivered to your Inbox.

Join 142 other followers