• Archives

  • Categories

  • Pages

How early in the spring should I start using the Seasonal Defense® in my Pond Logic® DefensePAC®? | Decorative Ponds & Water Gardens Q & A

How Early In The Spring Should I Start Using The Seasonal Defense® In My Pond Logic® DefensePAC®? How early in the spring should I start using the Seasonal Defense® in my Pond Logic® DefensePAC®?

Marilyn – Jackson, MI

When maintaining a crystal-clear pond in cooler seasons, Seasonal Defense® is your best friend. Seasonal Defense® accelerates the decomposition of leaves, scum, and sediment that create pond muck during the fall and winter months.

Using Seasonal Defense® to maintain your pond through the cooler part of the season will gives you a head start on summer pond management. Seasonal Defense® replenishes winter bacteria loss, jump-starts your biological filters and breaks down unwanted waste. Once your pond is running for the season and water temperatures are above 40 degrees, start using Seasonal Defense® every week for about a month, or until the water is above 50 degrees. At this point you can start using the rest of the DefensePAC®. Don’t have your DefensePAC® yet? Now’s the best time!

Pond Logic Seasonal Defense

How Do I Revive My Aeration System After Storing It For The Entire Winter? | Ponds & Lakes Q&A

How Do I Revive My Aeration System After Storing It For The Entire Winter?

Q: How Do I Revive My Aeration System After Storing It For The Entire Winter?

John – Sumner, IA

A: If you turned your aerator off and stored it for the winter they are a few quick steps you can take to have your aeration system prepped and installed for the spring. If your winter has been anything like ours in southeastern Michigan, spring already seems upon us.

Here’s 4 ways to prep and install your aeration system for spring.

1.)  Change the Air Filter: The air filter is vital for providing clean air through the compressor. With a clogged air filter, performance diminishes and over time can cause irreversible damage to the compressor. We recommend changing your air filter every 3-6 months depending on the environment.

2.)  Check for Air: Before installing the unit and connecting airlines it is best to do a quick check for air. Turn the unit on and ensure air is coming out of the flex hose(s). If you have a multiple diffuser plate system, make sure that the valves are not completely shut off. In the event where air is not coming from the flex hoses, you may need a maintenance kit to replace worn seals.

3.)  Reinstall the unit: To reinstall the unit, you’ll want to reposition the cabinet so it is sitting level, reconnect the airlines and plug it in. Adjust the airflow as needed, which you’ll need to do anyway if you have multiple diffuse plates. Adjust the flow so each air plate receives equal amounts of airflow and keep in mind that longer runs and deeper plates will require more airflow to operate than shallow plates and shorter lines. It usually takes a few minutes between adjustments to see the effect at the diffuser plant, so be patient!

4.)  Proper start up: Introduce your aeration system slowly in the beginning, and gradually increase its running time each day. Start by running it for an hour the first day, two hours the second day, doubling the amount of time each day until you can successfully run it for 24 hours. If you run the system immediately for 24 hours upon returning it to the pond, you could cause the warm and cold layers of water to mix too quickly which may harm fish.

These quick steps will ensure your aeration system is back up and running to keep your pond clean, clear and healthy for years to come.

POND TALK: Do you use your pond for recreation in the winter?

Airmax® Aeration Systems - Breathe Some Life Into Your Pond

Follow

Get every new post delivered to your Inbox.

Join 137 other followers