Q: What should I do with my fountain in the winter?
David – Crystal Lake, IL
A: Do you have a decorative fountain in your lake or pond? If so, take advantage of the off season and do all your maintenance chores now rather than in the spring—when you could be caught without a fountain for that early-season party.
Any time before the ice begins to form on your pond, remove your fountain and perform these basic upkeep tasks:
1. Power Check: Check the fountain’s power cord for any cuts or cracks. If you find any, you may need to repair the cord or replace the unit altogether.
2. Power Cleaning: Next, pull out your power washer and clean the fountain’s float and motor to remove debris buildup that’s occurred over the past year (or however long you’ve procrastinated …). Built-up debris can act as an insulator, which can possibly cause your fountain’s motor to overheat during the summer months.
3. Routine Maintenance: Finally, contact your fountain’s manufacturer or call your local fountain dealer to have routine maintenance performed on the motor. Its seals and oil should be replaced every year or two to ensure good performance.
When spring rolls around, put your decorative fountain back in place—but until then, make sure you keep your pond or lake aerated with a diffused aeration system, like the Airmax® Deep Water Aeration System. It efficiently pushes tiny oxygen bubbles throughout your pond’s water column all winter long
Pond Talk: How often do you perform maintenance on your pond or lake’s decorative fountain?