• Archives

  • Categories

  • Pages

4 Spring Start-Up Tips For Your Pond & Lake Aeration System | Ponds & Lakes Q&A

How Do I Revive My Aeration System After Storing It For The Entire Winter? How Do I Revive My Aeration System After Storing It For The Entire Winter?

John – Sumner, IA

If you turned your aerator off and stored it for the winter they are a few quick steps you can take to have your aeration system prepped and installed for the spring. If your winter has been anything like ours in southeastern Michigan, spring already seems upon us.

Here’s 4 ways to prep and install your aeration system for spring.

1.)  Change the air filter: The air filter is vital for providing clean air through the compressor. With a clogged air filter, performance diminishes and over time can cause irreversible damage to the compressor. We recommend changing your air filter every 3-6 months depending on the environment.

2.)  Check for Air: Before installing the unit and connecting airlines it is best to do a quick check for air. Turn the unit on and ensure air is coming out of the flex hose(s). If you have a multiple diffuser plate system, make sure that the valves are not completely shut off. In the event where air is not coming from the flex hoses, you may need a maintenance kit to replace the diaphragm.

3.)  Reinstall the unit: To reinstall the unit, you’ll want to reposition the cabinet so it is sitting level, reconnect the airlines and plug it in. Adjust the airflow as needed, which you’ll need to do anyway if you have multiple diffuse plates. Adjust the flow so each air plate receives equal amounts of airflow and keep in mind that longer runs and deeper plates will require more airflow to operate than shallow plates and shorter lines. It usually takes a few minutes between adjustments to see the effect at the diffuser plant, so be patient!

4.)  Proper start up: Introduce your aeration system slowly in the beginning, and gradually increase its running time each day. Start by running it for an hour the first day, two hours the second day, doubling the amount of time each day until you can successfully run it for 24 hours. If you run the system immediately for 24 hours upon returning it to the pond, you could cause the warm and cold layers of water to mix too quickly which may harm fish.

These quick steps will ensure your aeration system is back up and running to keep your pond clean, clear and healthy for years to come.

POND TALK: Do you use your pond for recreation in the winter?

Airmax Replacement Air Filters

What Is A Hybrid Bluegill? Should I Put Them In My Pond? | Ponds & Lakes Q&A

What Is A Hybrid Bluegill? Should I Put Them In My Pond? What Is A Hybrid Bluegill? Should I Put Them In My Pond?

Richard – Sheridan, IL

Stocking up on fish for your pond can be fun and exciting, but if you’re thinking of adding bluegill, knowing some of the key differences between hybrid and regular bluegill will help you maintain a balanced pond.

Regular bluegill can grow to be anywhere between six and ten inches, and are olive green with an orange underbelly. They have uniform blue-black markings on the gills and fins, hence the name bluegill. The issue with regular bluegill is they reproduce quickly and can take over a pond very fast if there is not a suitable predator fish population keeping them in check. We recommend stocking your pond with hybrid bluegill to help prevent overpopulation.

Hybrid bluegill are a cross between male bluegill and female sunfish, which result in an 80%-90% of the population being reproduced male. This slows down fast reproduction by keeping the female population to a minimum. Do to their hybrid nature, they can also be slightly larger and have a bit more coloration to them than regular bluegill.

Whenever stocking any type of bluegill, keeping the population in check is key. To do this you must have the correct ratio of predator fish such as bass or walleye. We recommend a 3 to 1 ratio between prey and predator. This means for every 3 prey, you need one predator. For example, if you stock 150 bluegill you will want approximately 50 bass.

When stocking your pond with bluegill, use hybrid bluegill. They are still great for fishing and with these fish attractors, you’ll have plenty of action!

POND TALK: Have you ever had an overpopulation of bluegill in your pond? What did you do to keep the population in check?

Tomahawk Live Traps - Fish Trap

What Are The Benefits Of Using Barley Straw In My Pond? | Decorative Ponds & Water Gardens Q & A

What Are The Benefits Of Using Barley Straw In My Pond? What Are The Benefits Of Using Barley Straw In My Pond?

David – Mullica Hill, NJ

Whoever thought of adding barley straw to a pond must’ve discovered its advantages either by accident or because they were very clever. Because barley straw breaks down, it releases a byproduct and this byproduct is known to make the water conditions unfavorable for new algae growth without affecting any other aquatic life. Barley straw has been used in larger ponds and lakes for several decades and it was only natural for this method of preventing algae to spillover (pun intended) to water gardens.

When applying the bales to your pond, it’s best to leave it in the mesh bag so that the straw doesn’t float around everywhere. Also keep in mind that it will take roughly four to six weeks for the barley to start having an effect on your pond, so just add it early in the season and don’t become impatient if you don’t notice results right away. Remember, perfection takes time! Make sure as well to place the bales in an area that receives a good amount flow so all the pond water comes in contact with the barley. A waterfall filter box is a great choice to help spread the water.

Barley Straw is also available in a pellet form and a liquid extract. POND TALK: Which barley form do you find that works the best: bales, pellets, or liquid?

Pond Logic Barley Straw

Follow

Get every new post delivered to your Inbox.

Join 143 other followers