• Archives

  • Categories

  • Pages

4 Spring Start-Up Tips For Your Pond & Lake Aeration System | Ponds & Lakes Q&A


How Do I Revive My Aeration System After Storing It For The Entire Winter? How Do I Revive My Aeration System After Storing It For The Entire Winter?

John – Sumner, IA

If you turned your aerator off and stored it for the winter they are a few quick steps you can take to have your aeration system prepped and installed for the spring. If your winter has been anything like ours in southeastern Michigan, spring already seems upon us.

Here’s 4 ways to prep and install your aeration system for spring.

1.)  Change the air filter: The air filter is vital for providing clean air through the compressor. With a clogged air filter, performance diminishes and over time can cause irreversible damage to the compressor. We recommend changing your air filter every 3-6 months depending on the environment.

2.)  Check for Air: Before installing the unit and connecting airlines it is best to do a quick check for air. Turn the unit on and ensure air is coming out of the flex hose(s). If you have a multiple diffuser plate system, make sure that the valves are not completely shut off. In the event where air is not coming from the flex hoses, you may need a maintenance kit to replace the diaphragm.

3.)  Reinstall the unit: To reinstall the unit, you’ll want to reposition the cabinet so it is sitting level, reconnect the airlines and plug it in. Adjust the airflow as needed, which you’ll need to do anyway if you have multiple diffuse plates. Adjust the flow so each air plate receives equal amounts of airflow and keep in mind that longer runs and deeper plates will require more airflow to operate than shallow plates and shorter lines. It usually takes a few minutes between adjustments to see the effect at the diffuser plant, so be patient!

4.)  Proper start up: Introduce your aeration system slowly in the beginning, and gradually increase its running time each day. Start by running it for an hour the first day, two hours the second day, doubling the amount of time each day until you can successfully run it for 24 hours. If you run the system immediately for 24 hours upon returning it to the pond, you could cause the warm and cold layers of water to mix too quickly which may harm fish.

These quick steps will ensure your aeration system is back up and running to keep your pond clean, clear and healthy for years to come.

POND TALK: Do you use your pond for recreation in the winter?

Airmax Replacement Air Filters

2 Responses

  1. I started up the waterfall today in my pond. I also added some cellulase enzymes to break down the debris. Do I need to leave the filter on 24-7?

    • We highly recommend to keep your filter running 24/7. The reason is to keep your water healthy and make it a great environment for fish. The other reason is to add oxygen to the pond. Any splashing from the waterfall will aid in this.

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

Follow

Get every new post delivered to your Inbox.

Join 131 other followers

%d bloggers like this: