• Archives

  • Categories

  • Pages

I have algae growing all over the place. I keep using chemicals but they don’t seem to last long. What else can I do? – Ponds & Lakes Q & A

The best way to beat algae is with the Airmax® Ecosystem PROactive approach.
Pre-order For Fish Day Online…more info

I have algae growing all over the place. I keep using chemicals but it doesn’t seem to last long. What else can I do? Howard – Dallas/Ft Worth, TX

Beat Your Greens
As we approach our warmer spring and summer months, you may find yourself watching in awe as algae takes over your pond at an almost impossible rate. What is going on in your pond that is making it punish you so? Let’s take a look at the cause of algae and your approach on treating it.

Ready, Get Set, React
Unless you find your new algae bloom a welcome addition to your pond, you will want to get rid of it as soon as possible. Algaecides like Algae Defense® and Cutrine®-Plus Granular are great products to eliminate existing algae blooms. If you have trout, Koi or goldfish in your pond, you will want to use a non-copper based product like Clipper™ to do the job. While these products address the current outbreak in your pond, they will not treat the source of the issue or prevent future occurrences and they require repetitive treatments. Even after the algae bloom is killed, you will still have to do some legwork in terms of removing dead plant matter. Leaving dead algae in your pond will only hinder your quest for a clear pond by providing even more algae food in the form of decaying plant matter. For these reasons, using chemical applications to fight algae is referred to as a reactive approach.

Going Proactive
As the saying goes, “The way to algae’s heart is through its stomach”. While we might not be current with our sayings, this one still holds some truth. Eliminate the food sources available to algae and you will send it packing. Performing regular maintenance in your pond to prevent algae growth is a proactive treatment. Algae can utilize both available sunlight and nutrients held in your pond to stage its backyard assault. By adopting a proactive routine, you can keep your pond clean and clear all season long and save some money on repetitive chemical treatments.

The best step you can take in establishing a Proactive treatment plan is to implement aeration in your pond. Sub-surface aeration systems like our Airmax® Aeration Series will circulate your pond’s water column and infuse it with dissolved oxygen, which on its own will promote the colonization of beneficial bacteria. These beneficial bacteria will break down that same nutrient load your algae utilizes, thereby discouraging continued growth. The bacteria in products like Pond Logic® PondClear™ and MuckAway™ will reinforce the natural bacteria in your pond, ensuring that your pond is able to break down nutrients faster than they are being introduced into the pond. Without an available nutrient load, algae will have to utilize sunlight to generate food. By adding pond dye, you can not only beautify your pond, but also limit the amount of light able to penetrate the water surface. Pond dyes like Pond Logic® Nature’s Blue™, Twilight Blue™, or Black DyeMond™ give you the option to choose the color that best suits your pond while still obtaining a natural look. If you would like more information on choosing the right shade for your pond, click HERE.

We have packaged a collection of products to take the guesswork out of completing your pond maintenance and appropriately named it the Pond Logic® ClearPAC® . The ClearPAC® contains PondClear™ Beneficial Bacterial, Nature’s Blue™, EcoBoost™ Bacteria Enhancer and Algae Defense® . These products are designed to kill algae, clear water, reduce muck, and shade your pond combining the immediate results of reactive treatments with the economical preventative results of a balanced proactive approach.

Pond Talk: Have you used MuckAway™ in you pond or lake? Were you happy with your results?

Pond Logic® ClearPAC® - DIY Complete Pond Care Program

I realized today that my pond seems to have a leak. How could I find out? – Decorative Ponds & Water Gardens Q & A

Put It On The Patch

I realized today that my pond seems to have a leak. How could I find out? Cindy – Kirtland, NM

This Blog Has A Lot of Holes

Having a leak in your Pond Liner can be frustrating at best, but not being able to locate the source of the water loss can be maddening. While repairing a leak in your pond is never your ideal way to spend time at your water garden, knowing how to locate and stop your leaks can change an extremely bothersome job into a relatively smooth process.

Now You See It … Now You Don’t

It is normal to experience some water loss in your pond throughout the season. This is due to evaporation. In areas with warmer climates it is not uncommon to lose a couple of inches of water each week. While evaporation is a natural process it can still be annoying at times as it will require you to add water to your pond to maintain your normal water level. Installing an Auto Fill Valve in your skimmer will keep ensure your pond is always at your desired water level without you having to go out and physically fill it. For those of you who experience small water loss like this during your warmer seasons, feel free to let out a sigh of relief, there will be no leak hunting for you today.

Learn To Locate Your Leaks

Alliteration aside, if you are losing more than a few inches a water from your pond in a short time span it is time to sniff out these leaks and seal them up. The best way to find the source of your water loss is to start with the obvious as it may save you the time and trouble of moving the rocks in your pond, or worse, pulling up your plumbing.

Look For Low Edges or Overspill: Inspect the edges of your pond, waterfall, and stream bed. Make sure there is no water spilling over the edges of these areas and if you have tight turns in your stream make sure the water able to follow the curve without splashing out. Check for damp areas or pooling water outside of the pond for indications of such leaks. If the water level exceeds the level of your pond liner you will want to adjust the level of the overflow drain in your skimmer to maintain a shallower water body. If you are losing water from the falls or stream bed re-arrange the rocks to remove obstructions and create gentler curves.

Shut Down Your Pump: If your search for the obvious turns out uneventful it is time to check the pond area itself. Shut down your pumps and turn off your auto fill valve if you have one. If you experience significant water loss from the pond then you have now successfully narrowed the search for the leak. If you have fish in your pond you will want to run an alternate form of Aeration while your system is shut down as the process can take a day or two. If the leak is in the side of the pond liner the water level will drop to the height of the cut in your liner and stop. If the leak is in the bottom of the pond the pond will eventually empty out so make sure you are periodically checking in on your project.

Inspect Your Skimmer and Plumbing: If the water is successfully being held in the pond with the pump off the leak my be in the Skimmer Box or the plumbing itself. Inspect the skimmer box and try to locate a crack or hole. Inspect and tighten the fittings going from the skimmer box or pump to the Waterfall Box. Follow the tubing path and look for any water dampness in the ground. If there is, there’s a good chance coupler fittings are loose or you have a leak in the tubing.

Got Milk?

For the areas that make sense, you can use milk or Pond Shade and an eye dropper to visually track the flow of the water leaving the pond. Go along the edges of the pond and apply drops to pinpoint the area of the pond where your pond water is making its great escape. Move any rocks or plants in that area and get ready to show this leak whose boss.

Does Your Pond Need To Quit Leaking? Put It On The Patch.

Once you have located the cut in your pond liner clean off any dirt or debris from the general area. If the hole is a small cut or puncture you can use Underwater Pond Sealer to cover the area and stop the leak. You do not have to drain the pond to use this type of sealant as it will cure underwater, just make sure that you apply the product in a bead and do not press it flat. You can use the Underwater Pond Sealer to patch holes in your waterfall box and skimmer as well. For holes up to 5” you can also purchase a Patch Kit. These kits will come with an adhesive patch that attaches directly to your liner after you have cleaned it and made sure it is dry. If you have opened the flood gates and put a puncture larger than 5” in the pond you can purchase additional Pond Liner and some Seam Tape to repair the damage. The use of seam tape will also require you to clean and dry the areas of liner surrounding the hole. After applying Seam Tape, we recommend using Cover Tape to ensure the leak is secure. Regardless of which type of repair you use you will want to overlap the cut, tear, or hole by at least 1” to ensure an adequate seal.

Pond Talk: Have you ever had a leak in your water garden? How did you go about fixing it?

Underwater Pond Sealer - Works wet or dry!

Follow

Get every new post delivered to your Inbox.

Join 142 other followers