Pond & Lake Q & A
Q: How do I control invasive Phragmites in my lake?
A: The common reed, Phragmites australis, may seem innocent enough, but these tall grasses topped with feathery tufts can quickly crowd a farm pond or lake. Native and non-invasive varieties of the plants have thrived in wetlands for centuries throughout the United States, but invasive varieties have taken root on the East Coast, Midwest and Pacific Northwest, and in your lake, creating a nuisance along shorelines.
Growing along streams and ponds, phragmites is a perennial wetland grass that can grow to 6 to 15 feet high. The stems, which are erect, smooth and hollow, may be nearly 1 inch in diameter and are topped with 12-inch-long dense panicles, or purple-brown pyramid-shaped plumes of flowers, that emerge between July and September. Leaves arise from the stem are 10 to 20 inches long and up to 2 inches wide.
The plants propagate mainly via an extensive network of underground rhizomes, or horizontal stems, that produce roots and shoots that grow as deep as 39 inches, with their root systems growing down another 3 feet. Dense above ground and below, stands of these plants crowd out native plants and animals; block shorelines, reducing access for swimming, hunting and fishing; and create fire hazards from dry plant material. But they can be controlled.
Controlling the Common Reed
Once phragmites has invaded your lake or pond, you’ll need to develop a long-term management plan to control the plant. Unfortunately, because the plants spread through their rhizomes, they could be difficult to eradicate entirely. That’s where chemical and mechanical control can help.
Herbicidal Control: First, you can spray an EPA-registered herbicide and surfactant product, like Kraken & Cide-Kick Combo, in the late summer or early fall. Mix 4 ounces of Kraken and 2 ounces of Cide-Kick with 1.5 gallons of water. Pour into pond sprayer (like the Airmax Pond Sprayer) and spray on the plants to completely wet the surface of the leaves. Allow the mixture to absorb into the plant and the root system, the most difficult part of the plant to kill, for one to two weeks.
Mechanical Control: Once the herbicide has had a chance to soak into the phragmites’ root system, you can use a weed cutter to cut at the base of the plants, allowing for easier removal with a pond rake. If
you can control your pond’s or lake’s water line, you can also cut the phragmites 2 to 3 inches below the water surface to cut off the plant’s supply of oxygen and drown the plant. To prevent the accidental
spread of the plant, collect the cut material and bag it before disposing of it.
Plan to repeat this routine several years in a row. Patches may emerge even after regular treatments, but once you’ve wiped out the majority of the phragmites, the plant will be much easier to control. Good luck!
POND TALK: How do you control phragmites in your pond or lake?