• Archives

  • Categories

  • Pages

10 Springtime Start-Up Tips for Your Water Feature – Water Feature Q & A


Picture of a Pond O Matic XL Pond Vacuum.

Water Feature Q & A

Q: I have a water garden that I built last year. Is there anything I should be doing in the Springtime to get it ready? – Maggie of Indiana

A: Great question Maggie! With the onset of warm weather, now is the time to get outside and begin enjoying the water feature season. Your pond has been dormant all winter and needs a little care to make it beautiful. Follow these ten simple steps to prepare your water feature for success.

1. Inspect your pond. Check to see what affect the winter weather has had on the pond liner, skimmer or biological filter. Make repairs as needed.

2. Make a water change and clean-up winter waste build-up. Use the 4 in 1 Interchangable Pond Net or Pond Vacuum to remove dead leaves, debris and muck that have accumulated in the bottom of the pond over the winter. Pond Logic Oxy-Lift Defense works great for lifting debris off rocks and bringing debris to the surface for easy removal. Water changes are also helpful in eliminating dissolved organics that have built up over the winter. You should make a 15 to 25 percent water change over several consecutive days to reduce stress to your fish.

3. Condition your tap water. When doing a spring start-up water change, don’t forget that you need to eliminate chorine and chloramines found in municipal water. Even small traces of chlorine will irritate fish and damage their gill tissue, and large amounts can be lethal. Use Pond & Fish Conditioner to accomplish this.

4. Start the biological filter. Clean or replace filter pads, seed them quickly with PL Gel and begin adding Pond Logic’s Seasonal Defense Natural Bacteria to boost biological activity. For longer life span filter pads, try using Matala Filter Pads.

5. Test pond water. It is not possible to know the condition of your pond water without testing. Using the Master Test Kit offers a quick and accurate way to evaluate pond water quality and stop problems before they occur.

6. Inspect your fish. If you see torn fins, blood streaks and/or ulcers, Pond Fish Treatment is a great all-in-one product for both koi and goldfish treating bacterial infections and parasites.

7. Feed your fish a low-protein food. As the temperature of your pond water approaches 40° F, your fish will start looking for food. Pond Logic Spring & Fall Fish Food is recommended as a good low protein, high carbohydrate, vitamin-enriched diet, specially formulated for all pond fish when water temperatures are between 40-50° F.

8. Provide your fish with essential electrolytes. Pond Logic Pond Salt provides all the essential electrolytes fish need to stay healthy and vibrant. Pond Salt can also help to reduce
algae blooms.

9. Care for pond plants. Root bound plants should be divided and re-potted. Fertilize plants with Lily Tabs to provide the essential nutrients for strong growth and early spring blooms. Adding floating plants such as Water Hyacinths or Water Lettuce will provide your pond with shade and remove excess nutrients reducing algae growth. It is also a great time to add Pond Snails to begin consuming algae keeping your pond clean. Don’t have any plants yet? Consider one of our Complete Plant Packages.

10. Keep your water feature clean, clear and healthy all season. Digest sludge, reduce dissolved organics and keep you pond filter working its best with the all-in-one awarding winning package, the Pond Logic DefensePAC.

6 Responses

  1. E. Ritter,

    I’ve been there. It gets frustrating doesn’t it? Here is a great post on finding leaks. Finding a Leak in Your Liner. Let me know if you still have trouble after this.

  2. How can we find a leak or hole in the liner?, is there a trick to finding a hole eaiser than looking every square inch? We found a 2×2 inch hole that a mouse chewed thru, over the winter, thought we had it,but pond is still leaking! Help! Thank-you E. Ritter

  3. Karen,

    Plants can withstand certain amounts of salt. For instance, with our Pond Salt, we suggest using 1-1/4 cups per 100 gallons of water for water gardens that contain aquatic plants. Using any more than that can cause harm to the aquatic plants. Our recommended dose for water gardens without plants is double that.

    Hope that helps.

  4. Which floating plants can withstand salt in the water?

  5. Sam Umscheid,

    I wouldn’t worry that it was the cause of the water in your pond. I know quite a few that have large sized water gardens that swim in them all the time and your bound to get water in your mouth or eyes when swimming in them. I also know quite a few who have aquariums that have siphoned the water out into their mouths accidentally while doing water changes. It is a very common thing that happens to all of us pond owners sooner or later. =) Hopefully this helps

  6. I was cleaning out my pond last week and got water in my mouth and eyes. Now I have a horrible stomach ache and it’s hard to eat. Could some bacteria have gotten into my system?
    Sam

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

Follow

Get every new post delivered to your Inbox.

Join 141 other followers

%d bloggers like this: